I-KP01
Page 8
Maintenance
The only maintenance required is an annual test of the keypad keys
and cleaning.
Testing the Keys
To start testing, make sure the system is idle then:
1. Enter the Installer Menu and select
Test
.
The display shows the Test menu.
2. Select
Keypads
.
3. Press each key once. The display shows a character in
response. Press both panic alarm keys together to test. Press
X
to end the test.
Cleaning
Clean the outside of the case with a soft dry cloth. Do not use
water, solvents or any proprietary cleaning agents.
© Cooper Security Ltd. 2008
Every effort has been made to ensure that the contents of this book are correct. However,
neither the authors nor Cooper Security Limited accept any liability for loss or damage caused
or alleged to be caused directly or indirectly by this book. The contents of this book are subject
to change without notice.
Printed and published in the U.K.
This manual applies to software used in the I-ON16 control unit with version 1.xx.xx software.
www.coopersecurity.co.uk
Product Support (UK) Tel: +44 (0) 870 757 5400.
Available between:
08:15 and 17:00 Monday to Friday.
Product Support Fax: (01594) 545401
Part Number
11847977
Issue 1
