IM020
SC-SF111B19
6
дегенді
білдіреді.
Оларды
арнайы
қабылдау
бөлімшелеріне өткізу қажет.
Қалдықтарды жинау жүйелері туралы қосымша
мәліметтер алу үшін жергілікті басқару органдарына
хабарласыңыз.
Қалдықтарды
дұрыс
кәдеге
жарату
бағалы
ресурстарды сақтауға және қалдықтарды дұрыс
шығармау салдарынан адамның денсаулығына және
қоршаған ортаға келетін теріс әсерлердің алдын алуға
көмектеседі.
GB
INSTRUCTION MANUAL
IMPORTANT SAFEGUARDS
Important safeguards. read carefully and keep for future
reference.
Incorrect operation and improper handling can lead to
malfunction of the appliance and injuries to the user.
Before connecting the appliance for the first time check
that voltage indicated on the rating label corresponds to
the mains voltage in your home.
For home use only. Do not use for industrial purposes.
Do not use the appliance for any other purposes than
described in this instruction manual.
Do not use outdoors.
The appliance is not intended for use for physically,
sensory or mental disabled person (including children) or
for person with lack of life experience or knowledge, if
only they are under supervision or have been instructed
about the use of the unit by responsible person.
Children must be under control in order not to be allowed
to play with the appliance.
Always unplug the appliance from the power supply
before cleaning and when not in use.
To prevent risk of electric shock and fire, do not immerse
the appliance in water or any other liquids. If it has
happened DO NOT TOUCH the appliance, unplug it
immediately and check in a service center.
Do not use the device in bathrooms and near water.
Do not place the appliance near heat sources.
Do not leave the appliance switched on when not in use.
Do not use other attachments than those supplied.
In case of power cord is damaged, its replacement
should be done by the manufacture or service
department or the other high-skill person to avoid any
danger.
Keep the cord away from sharp edges and hot surfaces.
Do not pull, twist, or wrap the power cord around the
appliance.
Avoid contact with moving parts of the device. Do not put
pencils or other objects through the protective grid of the
fan.
Do not operate without fan installed protective grid.
Do not attempt to repair, adjust or replace parts in the
appliance. Repair the malfunctioning appliance in the
nearest service center.
If the product has been exposed to temperatures below
0ºC for some time it should be kept at room temperature
for at least 2 hours before turning it on.
The manufacturer reserves the right to introduce minor
changes into the product design without prior notice,
unless such changes influence significantly the product
safety, performance, and functions.
Manufacturing date is indicated on the unit and/or on
packing as well as in accompanying documents in the
following format XX.XXXX where first two figures XX is
the month of production, and following four figures XXXX
is the year of production.
ASSEMBLING INSTRUCTIONS:
The device is intended for air circulation in the room.
Fan is packed disassembled. Before assembling make
sure that all the required parts are undamaged and
included into the set.
Do not plug in the device before its assembling is
finished.
Tighten stand tube to stand base with screw. Fix base
cover to stand base with a screw (supplied with a set).
Unscrew out-joint, put the stand cover and base cover on
the stand base, pull the extension pole out then tighten
the out-joint again.
Place control box firmly on top of extension pole, tighten
screw B.
Unscrew the blade cap by turning clockwise and rear grill
nut by turning counter clockwise and put both blade cap
and rear grill nut off the motor shaft.
Put rear grille on motor shaft.
Secure it with rear grille nut.
Slide blades on motor shaft so that claws on motor shaft
match the blades slots.
Screw blade cap on shaft by turning counter clockwise.
Put front grille on rear grille and close clips or screw grille
ring to secure grilles together.
Adjust the fan vertically by vertical adjustment screw.
The fan is ready for work.
OPERATION MANUAL
CAUTION: To avoid electroconvulsive shock or fire
danger, do not operate fan under the conditions of
increased humidity.
Place fan only onto dry flat unyielding surface.
The fan can work in three speed modes:
-
“1” For minimum operational speed;
-
“2” For medium operational speed;
-
“3” For maximum operational speed;
-
“0” The fan is switched off;
-
“
” Night light mode.
On the upper part of the motor cover there is oscillating
knob. If pressed, it makes the fan cabinet with blades
traverse from side to side. To cancel oscillating mode
push oscillating knob upward.
To switch the fan off push the button “0”
MAINTENANCE
Before cleaning unplug fan first.
Clean front and rear grilles, blades, stand tube and stand
base with soft moistened cloth and wipe dry.
Do not use abrasive cleansers
STORAGE
Keep the device in normal conditions in dry place.
The symbol on the unit, packing materials and/or
documentations means used electrical and electronic
units and battery’s should not be toss in the garbage with
ordinary household garbage. These units should be pass
to special receiving point.
For additional information about actual system of the
garbage collection address to the local authority.
Valid utilization will help to save valuable resources and
avoid negative work on the public health and environment
which happens with incorrect using garbage.
