IM019
www.scarlett.ru
SC-JE50S17
4
GB
INSTRUCTION MANUAL
IMPORTANT SAFEGUARDS
Please read these operating instructions carefully before connecting your kettle to the power supply, in order to
avoid damage due to incorrect use.
Before the first switching on check that the voltage indicated on the rating label corresponds to the mains voltage
in your house.
Incorrect operation and improper handling can lead to malfunction of the appliance and injuries to the user.
Do not use outdoors.
The appliance is intended for use only in domestic aims. The unit is not intended for industrial and commercial
use, and also for use in:
kitchen area for the stuff of shops, offices and the other industrial places
farm houses
hotels, motels, rest homes and other similar places by residents.
Do not disassemble the juice extractor when it is plugged to the power supply.
Always unplug the
appliance from the power supply before cleaning and when not in use.
To prevent risk of electric shock and fire, do not immerse the appliance in water or any other liquids. If it has
happened, unplug it immediately and check in a service center.
The appliance is not intended for use for physically, sensory or mental disabled person (including children) or for
person with lack of life experience or knowledge, if only they are under supervision or have been instructed about
the use of the unit by responsible person.
Children must be under control in order not to be allowed to play with the appliance.
Do not leave the appliance switched on when not in use.
Do not use other attachments than those supplied.
In case of power cord is damaged, its replacement should be done by the manufacture or service department or
the other high-skill person to avoid any danger.
Do not attempt to repair, adjust or replace parts in the appliance. Check and repair the malfunctioning appliance
in the nearest service center only.
Keep the cord away from sharp edges and hot surfaces.
Do not pull, twist, or wrap the power cord around the appliance.
Do not place the appliance near gas or electric oven or store at heated surface.
Avoid contacting with moving parts.
The grating filter is very sharp, so handle it with care.
Warning! Do not use the appliance if the rotating strainer is damaged.
Always make sure the safety lock is fastened correctly before switching on. The unit is designed to shut off
automatically if locks are not fastened securely in place.
Do not push products into the appliance by fingers while it is in operation. If food becomes lodged in feeder tube,
use pusher to push it down. If this doesn’t work, turn the motor off, unplug unit, and then disassemble juice
extractor to remove remaining food.
Do not run juice extractor continuously for longer than 10 minute
. Turn off switch and let it rest for at least
10 minute to cool down the motor, otherwise the motor may be damaged.
Every time make sure that the appliance is unplugged and all moving parts with motor are stopped completely
before disassembling and cleaning.
Be sure to switch off the unit after each use.
Do not overload appliance with products.
It is not recommended to keep the non-loaded unit more than 1 minute.
If the product has been exposed to temperatures below 0ºC for some time it should be kept at room temperature
for at least 2 hours before turning it on.
The manufacturer reserves the right to introduce minor changes into the product design without prior notice,
unless such changes influence significantly the product safety, performance, and functions.
Production date mentioned on the unit and/or on the packing materials and documentations.
BEFORE USING FOR THE FIRST TIME
After unpacking the unit and before any use, make sure the mechanical parts of the unit and all attachments are
not damaged.
Wash and dry all parts of the appliance, which will come into contact with products. To clean the outside of the
body use a damp sponge.
Practice assembling and dismantling the unit a few times before making juice.
HOW TO ASSEMBLE
DISMANTLING:
Unplug the appliance from the power supply.
Open the locks.
Remove the transparent lid, pull the grating filter upwards, then take off separating unit. While doing this, hold it
by the beak from below and by the underside of the top of the unit on the other side.
ASSEMBLING:
Place the separating unit on the motor unit, push with both hands on the separating unit until it clicks into place.
Insert the grating filter; turn it clockwise to fit securely.
