IM011
5
GB
INSTRUCTION MANUAL
IMPORTANT SAFEGUARDS
•
Before connecting the appliance for the first time check that voltage indicated on the rating label corresponds to the
mains voltage in your home.
•
For home use only. Do not use for industrial purposes. Do not use the appliance for any other purposes than
described in this instruction manual.
•
Do not use outdoors.
•
Always unplug the appliance from the power supply before cleaning and when not in use.
•
To prevent risk of electric shock and fire, do not immerse the appliance in water or any other liquids.
•
This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning
use of the appliances by a person responsible for their safety.
•
Children should be supervised to ensure that they do not play with the appliance.
•
Do not leave the appliance switched on when not in use.
•
If the power cord is damaged it should be replaced by the manufacturer or authorized servicing center or qualified
professional for safety reasons.
•
Do not attempt to repair, adjust or replace parts in the appliance. Check and repair the malfunctioning appliance in
the nearest service center only.
•
Keep the cord away from sharp edges and hot surfaces.
•
Do not pull, twist, or wrap the power cord around the appliance.
•
Do not immerse the motor unit in any liquid or wash in a dishwasher.
•
WARNING:
The blades are extremely sharp and therefore dangerous. Handle with caution!
•
WARNING:
it is prohibited to overfill the unit or use it without ingredients. Do not exceed the continuous operating
time.
•
Plastic parts of the blender may be used at temperatures not higher than 40
o
C.
•
If the product has been exposed to temperatures below 0ºC for some time it should be kept at room temperature for
at least 2 hours before turning it on.
•
The manufacturer reserves the right to introduce minor changes into the product design without prior notice, unless
such changes influence significantly the product safety, performance, and functions.
PREPARATION FOR OPERATING
•
Prior to initial use wash all removable parts with warm water with cleansing agent and dry up carefully. Wipe the
outside of the motor base with moist tissue.
•
It is strongly prohibited to immerse the motor base into any liquids and/or to clean it with water.
IMMERSION BLENDER
•
This unit is ideal for making cream soups, sauces and dressings, baby food, and also for blending various cocktails.
•
To prevent splashing, immerse the blender into products to be blended prior to switching it.
•
To remove, twist the immersion blender counterclockwise.
CHOPPING BLADE / MINI-CHOPPER
•
Mini-chopper is ideal for chopping greenery and vegetables, cheese, majority of nuts, dried fruits. Hard products,
such as meat, onion, carrots, need to be cut before processing. Nutshells must be removed, meat must be
separated from bones and tendons.
•
The chopper is not suitable for crushing ice and chopping hard products, such as coffee grains, nutmegs, cereals.
•
Caution! The chopping blade is very sharp! Hold the blade by the top plastic area only!
•
Place the blade on the central finger in the jar.
•
Add ingredients into the jar.
•
Cover the jar with the drive.
•
Place the motor base into the jar drive until tightened.
•
While chopping, hold the motor base with one hand, accessory jar – with the other hand.
•
When finished, remove the motor base first.
•
Place the motor base into the bowl drive, secure it by pressing the knob (4).
•
After use, remove first the motor base by pressing the knob (4).
•
Then remove the jar drive.
•
Remove the blade carefully.
•
At this point you may remove chopped ingredients from the jar.
SUPPORTING DISC.
•
Supporting disc is used for slicing (11) and shredding (9, 10) vegetables, e.g. cucumbers, carrots, potatoes, onions,
and some kinds of chees.
•
Place one of replaceable blade into disc.
•
WARNING: replaceable blades are very sharp! Handle them with care!
•
To secure the blade in the disc, press it so that locked with the edge of the aperture.
•
Place the disc on the pin firmly.
•
Put the bowl on the drive.
•
Place the motor part on the bowl drive.
Summary of Contents for Silverline SL-HB43K01
