HDMI 1 in 4 out SPLITTER with IR extender
XHDM314
Email: support@kovert.com
Last Revised 01/06/2018
1. Power 5v DC 2. HDMI Output 4 3. HDMI Output 3 7. Dipswitches 8. IR 9. Upgrade
4. HDMI Input
5. HDMI Output 2 6. HDMI Output 1 10. HDMI Output LEDs 11. Reset 12. Power LED
Features
This HDMI splitter will distribute four HDMI signals from a source device such as a DVR, DVD player,
Satellite Receiver, Set Top Box, DV Camera, A/V Receiver or other HDMI device to HDTVs or HDMI
flat panel display monitor.
1.
Fully compliant with HDMI 1.4 specification.
2.
Supports CEC.
Consumer Electronics Control
(
CEC
) is a feature of HDMI designed to allow
users to command and control up to 15 devices connected through HDMI by using one CEC
remote controller.
3.
Incorporates built in IR extender function.
4.
Blue-Ray DVD 24/50/60fs.
5.
Audio formats DTS-HD / Dolby-true HD/ DTS / Dolby-AC3 / DSD.
6.
Extends transmission distance and improves transmission signal. Using an HDM150 can extend
distance further. An HDM150 can be used prior to and after the HDM314. See test results below.
RESOLUTION
INPUT TO
INPUT TO
OUTPUT
TOTAL RUN
1080P
HDM314
15 metres
-
-
15 metres
30 metres
1080P
HDM150
15 metres
HDM314
15 metres
15 metres
45 metres
4K
HDM314
10 metres
-
-
15 metres
25 metres
4K
HDM150
10 metres
HDM312
15 metres
15 metres
40 metres
7.
Supports EDID - Extended Display Identification Data (EDID)
is a data structure provided by a
digital display to describe its video capabilities to a video source (e.g. PC graphics card , set-top
box etc). It enables a modern PC
to
know what kinds of monitors are connected to it.
HDM314
1 IN 4 OUT HDMI SPLITTER
This is a 4K 3D HDMI splitter and provides HD
output streams for 480i/p, 576i/p, 720i/p,
1080i/p and 3840 x 2160 @ 25/30Hz. Using
dipswitches you can produce 4 x 1080P or 4 x
4K outputs. Using EDID will reproduce input.
Additionally the HDM314 supports an IR
extender. This can be used to control a monitor
IR remote.
1
2
3
4
7
8
9
10
11
5
6
12
IR TX
IR RX
5v DC PSU
IR Adaptor
