43
Using BIOS
Frequency/Voltage Control
This item enables you to set the clock speed and system bus for your system. The clock
speed and system bus are determined by the kind of processor you have installed in your
system.
DIMM Voltage Adjust (2.60V)
This item adjusts the voltage delivered to the DIMM memory.
AGP Voltage Regulator (1.53V)
This item regulates the voltage delivered to the AGP.
Auto Detect PCI/DIMM Clk (Enabled)
When this item is enabled, BIOS will disable the clock signal of free PCI and DIMM slots.
DIMM Voltage Adjust
[2.60V]
AGP Voltage Regulator
[1.53V]
Auto Detect PCI Clk
[Enabled]
Spread Spectrum
[Enabled]
Async AGP colck control
[Disabled]
Hammer Fid control
[StartUp]
Hammer Vid control
[StartUp]
CPU Clock
[200MHz]
Turbo Performance
[Disabled]
Item Help
Menu Level
Phoenix-AwardBIOS CMOS Setup Utility
Frequency/Voltage Control
F5:Previous Values F6:Fail-Safe Defaults F7:Optimized Defaults
: Move Enter: Select +/-/PU/PD:Value F10:Save ESC:Exit F1: General Help
Spread Spectrum (Enabled)
If you enable spread spectrum, it can significantly reduce the EMI (Electro-Magnetic Interference)
generated by the system.
Async AGP clock control (Disabled)
This item allows you to set the AGP clock in asynchronous status.
Hammer Fid control (StartUp)
This item allows you to adjust the CPU frequency ID.
Hammer Vid control (StartUp)
This item allows you to adjust the CPU voltage ID.
CPU Clock (200MHz)
Use the CPU Host Clock to set the frontside bus frequency for the installed processor (Min 200 MHz,
Max 232 MHz).
Turbo Performance (Disabled)
This function only works when loading performance Defaults setting.
Summary of Contents for K8T800Pro-A
