spec-3pt-latch-kit-instman
1
SCE-3PTL 3-Point Latch kit
Item Qty
Bill of material SCE-3PTL
Part I.D.
1
2
Rod Guide, 1/4 Turn Mtg. Guide For 0.25 x 0.63 Door Rod, Steel, Zinc
102253
2
2
Bolt, Hex Head, Serrated Flange, 1/4-20 x 3/8”, Steel, Zinc Clear Plated
112504
3
1
Door Center Adapter with Stop, 0.79 x 0.25, Zinc Die Cast
116470
4
1
Cam, 3 Point, Dual, Small Door Center with BSO’s, Steel, Zinc Clear
128142
5
2
Door Rod Assembly, 37.00 in. Precut Rod, 39.33 in. Assembled
128208
INSTALLATION INSTRUCTIONS:
A. Cut and assemble door rod assembly by following instructions on page 2.
B. Remove the mounting nuts from the quarter turn latches.
C. Insert door rod (5) through the rod guide (1).
D. Insert the rod guide onto quarter turn latch and resecure mounting nut.
See quarter turn assembly view
E. Complete door rod assembly by installing ramp shoe (7), adapter (8) and
set screws (6).
F. Install center door handle or latch and install the 3-point cam (4).
G. Install the door rod adapters onto cam and tighten hex head bolts (2).
1
2
3
4
5
Quarter turn assembly view
