E-649RA
- User Manual
• 3
EN
FR
IT
DESCRIPTION OF THE TOOL
2. TOOL OPERATION
Description of the tool:
1 - Nose-piece
2 - Mandrel tube
3 - Trigger
4 - Revolvable air supply
5 - Mandrel container
6 - Ring relief
7 - Unscrewing button
The manufacturer equipped the tool with an nose-piece /fig. 1 - pos.1/ for a Monobolt rivet
Ø6.4. Riveting with blind rivets of different diameters (further on referred to as BR) requires
use of appropriate nose-pieces /figure 1 - pos. 1/ that are located in the accessories casing
of the tool.
1. BASIC CHARACTERISTICS
FIG.1
RIVET
Ø RIVET
ALUMINIUM
STEEL
STAINLESS
STEEL
Recommended nose-pieces*
Standard
4,8
nose-piece n°5
5,0
nose-piece n°5
6,0
nose-piece n°6
6,4
nose-piece n°6.4
Structural
5,0
nose-piece n°5 Monobolt
6,4
nose-piece n°6.4 Monobolt
*Recommended numbers
of nose-pieces with
respect to rivet diameters
(does not apply for all
types of rivets).
Capacity:
Lenght:
293 mm
Height:
298 mm
Width
(over the angle valve)
:
127 mm
Weight:
1.8 kg
Stroke:
25 mm
Stroke force at 0.6 MPa:
16 kN
Air consumption:
3 L / stroke
Working pressure:
5 to 7 bars
Front nozzle diameter:
22.5 mm
Front nozzle length:
64 mm
Replacement of nose-pieces:
Connect the tool to the source of compressed air, depress the trigger and screw out the nose-
piece /figure 1 - pos. 1/ with a spanner no. 12. Screw on a new nose-piece /ace.te the chart/ and
tighten it.
Now you can release the trigger of the tool.
