ISD8001: Industrial ScentDirect
Diffusion System
Wall Mount Instructions
ISD-8001 MAINTENANCE GUIDE
Unit Cleaning
Unit should be cleaned with a soft damp cloth. Isopropyl or Denatured Alcohol may be used to clean any oil spill or
contaminants from the housing (inside and outside).
Any dust accumulation may be cleaned with a soft bristle brush. Remove any residue with damp cloth.
Unit should not be submerged in water for cleaning, nor should running water (hose) be used for cleaning.
Avoid using any cleaning fluid on the internal faceplate as strong solvents may remove the silk screen from the label.
Collector Cleaning
In order to clean the collector for unit storage and/or fragrance change. Remove collector from unit per BOTTLE
INSTALLATION INSTRUCTIONS. Remove collector from fragrance bottle and wipe fragrance oil from all exposed surfaces of
collector and pick-up tube with a lint free cloth soaked in alcohol.
Submerge pick up tube into a bottle of commercial Denatured Alcohol (unit does not need to thread onto bottle, only
submerge end of collector tube to allow pick up of alcohol) and re-connect collector to input and output hoses. Start
equipment and allow collector to atomize alcohol until fragrance oil inside collector is removed.
