-
4
-
www.SCEPTRE.com
Sound Bar 2.1 User Manual
SAFETY INSTRUCTIONS
This product is designed and manufactured to operate within defined design limits, and
misuse may result in electric shock or fire. To prevent the product from being damaged,
the following rules should be observed for the installation, use and maintenance of the
product. Read the following safety instructions before operating the Sound Bar. Keep
these instructions in a safe place for future reference.
To avoid the risk of electric shock or
component damage, switch off the
power before connecting other
components to the SOUND BAR.
Unplug the power cord before
cleaning the SOUND BAR. Please use
the included custom bezel cleaning
cloth for cleaning the bezel of the
SOUND BAR only. Do not use a liquid
or a spray cleaner for cleaning the
product. Do not use abrasive cleaners.
Always use the accessories
recommended by the manufacturer to
insure compatibility.
When moving the SOUND BAR from
an area of low temperature to an area
of high temperature, condensation
may form on the housing. Do not turn
on the SOUND BAR immediately after
this to avoid causing fire, electric
shock or component damage.
Do not place the SOUND BAR on an
unstable cart, stand, or table. If the
SOUND BAR falls, it can injure a
person and cause serious damage to
the appliance.
Any heat source should maintain a
distance of at least 5 feet away from
the SOUND BAR, i.e. radiator, heater,
oven, amplifier etc. Do not install the
product too close to anything that
produces smoke or moisture.
Operating the product close to smoke
or moisture may cause fire or electric
shock.
Never push any object into the
ventilation slots of the SOUND BAR.
Do not place any objects on the top of
the Product. It could short circuit parts
causing a fire or electric shock. Never
spill liquids on the SOUND BAR.
The SOUND BAR should be operated
only from the type of power source
indicated on the label. If you are not
sure of the type of power supplied to
your home, consult your dealer or
local power company.
The power cable must be replaced
when using different voltage from that
specified in the User Manual. For
more information, contact your dealer.
Do not overload power strips and
extension cords. Overloading can
result in fire or electric shock.
The wall socket should be installed
near the equipment and should be
easily accessible.
Only the marked power source can be
used for the product. Any power
source other than the specified one
may cause fire or electric shock.
Do not touch the power cord during
thunderstorms. To avoid electric shock,
avoid handling the power cord during
electrical storms.
Unplug the unit during a lightning
storm or when it will not be used for a
long period of time. This will protect
the SOUND BAR from damage due to
power surges.
Do not attempt to repair or service the
product yourself. Opening or removing
the back cover may expose you to
high voltages, the risk of electric shock,
and other hazards. If repair is required,
please contact your dealer and refer
all servicing to qualified service
personnel.
Keep the product away from moisture.
Do not expose this appliance to rain or
moisture. If water penetrates into the
product, unplug the power cord and
contact your dealer. Continuous use in
