-
8
-
www.SCEPTRE.com
SCEPTRE X325BV-FMQC User Manual
Attaching or Removing the Stand
1.
To install or remove the neck, screw in or remove the
4 screws
indicated in the
picture.
2.
To install the base, place the display unit flat on a table. Afterwards attach the
plastic base onto the neck.
Remember the plastic base should have more area
facing the front of the neck.
Fit the black plastic ring to the bottom of the base,
then the metal plate onto the bottom of the base by matching the 3 holes. Screw in
the
3 thick threaded screws
to secure the metal plate to the plastic base.
3.
To finalize your installation of the Display, please read the following:
a.
If you are placing the Display on a stand, we would recommend you to
use a Display safety strap (not included) in order to minimize the
possibility of the Display toppling over.
b.
If you are mounting the Display on the wall
c.
Make sure the wall is structurally safe for the weight of the Display
d.
Make sure the wall mount kit is compatible with the Display
e.
Read and follow all instructions provided by the wall mounting kit.
f.
Securely install all screws and connections.
