Operating and maintenance instructions
Installing the motor
Version 1.0
Page 18 of 56
4.2 Mounting the shaft sealing rings
Danger of property damage
Do not scratch or damage the sealing surfaces during disassembly
Do not tilt the sealing ring when pressing it in
4.2.1 Removal and replacement
The removal of sealing rings is generally not difficult. Usually a screwdriver or similar
is sufficient for disassembly. However, this will damage the sealing ring. After a
machine has been repaired or overhauled, new rotary shaft seals must always be
installed.
If there is a disassembly hole on the housing, the shaft seal can be pressed out with a
pin.
Item
Designation
1
Disassembly hole on housing
2
Shaft seal
NOTICE