Operating instructions / V03 / 01.2010
7 / 16
Operation
Cup warmer
Switch on the cup warmer
Plug in the mains plug.
►
Switch on the cup warmer using the ON/OFF switch
►
1
.
The switch lights up. The cup warmer is heated up after ± 60 minutes.
;
Adjust cup plate temperature
Mark the ground position of the switch on the backside of the machine! If the
temperature should be to high or to low, the switch can always be turned back to
its ground position.
Turn the adjustment screw clock wise on the backside of the machine.
►
The cup plate temperature increases.
;
Turn the adjustment screw counterclockwise wise on the backside of the ma-
►
chine.
The cup plate temperature decreases.
;
Filling the cup warmer
Carefully place the desired cups or pots with their openings downward in the
►
cup warmer.
Switch off the cup warmer
Switch off the cup warmer using the ON/OFF switch
►
1
.
The switch will no longer be illuminated.
;
►
Remove the plug from the power supply.
1
OFF
MAX.
FACTORY
SETTING
if this is not observed,
the warranty is invali-
dated in the event of
any resultant damage.
