NSG 438
3
Each electrostatic discharge produces powerful
electromagnetic interference.
Nearby electronic equipment can be seriously disrupted
unless the appropriate counter-measures are taken.
Perform ESD tests preferably in a shielded room.
If a network needs to be exchanged, the test has to be
stopped first, followed by a waiting time of at least 5s
to ensure the voltage being internally discharged.
The rechargeable batteries in the base station must not be short-circuited
under any circumstances. They must only be recharged with the original
charging unit supplied with the generator. Should they have to be
replaced, kindly observe the relevant recommendations for their correct
disposal.
The instrument must not be opened. Repairs, maintenance work and
internal adjustments are only to be carried out by a qualified service
engineer. Use the instrument only in dry surroundings. Any condensation
that occurs must be allowed to evaporate before putting the generator into
operation. Long periods of exposure to sunlight and excessive warming by
external energy sources are to be avoided.
Do not continue to use the instrument should any mechanical damage
occur. The instrument's housing and the cable have both an insulating and
a screening function, which can only be assured while the housing is
intact. Return a damaged generator to a Schaffner service centre
immediately for repair.
Schaffner EMV AG Luterbach, Switzerland and the associated sales
organization accept no responsibility for personal or material damage nor
for any consequential damage that results from irresponsible operation of
this instrument.
