Fire damper BSK-RPR-EU
Technical documentation
Accessories
Construction subject to change
No return possible
Version: 2021-07-01 | Page 12
ACCESSORIES
Available at an extra charge
Model made of stainless steel material no. 1.4301 (V2A)
or 1.4571 (V4A; replaceable, non-coated parts are made
of stainless steel material no. 1.4301)
Model with additional DD coating (solvent-containing
two-component top coat based on polyurethane varnish -
RAL 7035/light grey) inside/outside (replaceable, non-
coated parts are made of stainless steel material no.
1.4301)
Limit switch type ES, limit switch EasyF-ETX (EasyBus)
Spring return actuators B10/B11 or S00/S01
Smoke detection system type RMS with general building
supervisory approval (abZ) No. Z-78.6-58
2.)
Assembly part type REBT
1.)
for smoke detector RMSII-L of
the smoke detection system type RMS
Signaling and switching bus system type EasyBus
2.)
Fire damper mini-controller BKSYS
2.)
Extension piece type VT-RF
1.)
Duct connection spigot type RS
1.)
Security grille type ASG-RF/ASG-RS
1.)
1.)
Standard design galvanised sheet steel, material No.
1.4301 or 1.4571, DD coating (RAL 7035 / light-grey) pos-
sible.
2.)
For technical descriptions and documents, see respective
technical documentation
LIMIT SWITCH
Limit switch type ES
Electric limit switch for position indicators "OPEN" and/or
"CLOSED". Switching element including one NC and one NO
contact each, 4 connections for M3.5 screw terminals for max.
2 mm². 250 V AC, I
e
6A, IP67 -using suitable cable glands M20
(on site).
Figure 14: Circuit diagram limit switch type ES
Damper positions that can be displayed:
ESZ (type ES 1Z: "CLOSED")
ESA (type ES 1A: "OPEN")
EZA (type ES 2: "OPEN" and "CLOSED")
Limit switch type EasyF-ETX
For a technical description and documentation of the limit
switch ETX (type EasyF-ETX): see technical documentation sig-
nalling and switching bus system EasyBus.
