Fire damper BSK-RPR-EU
Technical documentation
Specification texts
Construction subject to change
No return possible
Version: 2021-07-01 | Page 22
Extension piece type VT-RF
(flange connection), for installa-
tion with large wall thicknesses; to maintain the minimum dis-
tance a
min
= 50 mm from the open damper blade when fitting
finishing protective grating type ASG-RF. Extension piece
made of profiled galvanised sheet steel with connection
flanges, L=160 mm (nominal sizes 100 - 450), L=190 mm (nom-
inal size 500).
Product: SCHAKO
type VT-RF
Dimensions:
Diameter:
.................... mm
Extra charge for anticorrosive paint - inside/outside -
DD coating (two-component top coat based on polyu-
rethane varnish - RAL 7035 / light-grey)
Extra charge for design:
Material no. 1.4301 (V2A)
Material no. 1.4571 (V4A)
Duct connection spigot type RS
, for connecting the assembly
part type EBT to BSK-RPR-EU or to round ventilation ducts,
consisting of a joining plate with bores and duct connection
spigot, galvanised sheet steel.
Product: SCHAKO
type RS
Dimensions: (W/H according to size of assembly part):
Width (W):
.................... mm
Height (H):
..................... mm
Duct connection spigot ø (øD): ..................... mm
Extra charge for anticorrosive paint - inside/outside -
DD coating (two-component top coat based on polyu-
rethane varnish - RAL 7035 / light-grey)
Extra charge for design:
Material no. 1.4301 (V2A)
Material no. 1.4571 (V4A)
Security grille type ASG-RF (-RS)
(flange connection) for con-
nection with ventilation duct connection on only one side,
wire or punch grille
, galvanised sheet steel, mesh width ≤ 20
mm, minimum distance a
min
= 50 mm from the open damper
leaf must be taken into account, if necessary, use extension
part type VT-RF or duct piece.
Product: SCHAKO
type ASG-RF
Dimensions:
Diameter:
.................... mm
Extra charge for anticorrosive paint - inside/outside -
DD coating (two-component top coat based on polyu-
rethane varnish - RAL 7035 / light-grey)
Extra charge for design:
Material no. 1.4301 (V2A)
Material no. 1.4571 (V4A)
Security grille type ASG-RS
(plug-in connection), for installa-
tion with ventilation duct connection on only one side, wire
or punch grille, galvanised sheet steel, mesh width ≤ 20 mm,
minimum distance a
min
= 50 mm from the open damper leaf
must be taken into account, if necessary, use extension piece
(on site).
Product: SCHAKO
type ASG-RS
Dimensions:
Diameter:
.................... mm
Extra charge for anticorrosive paint - inside/outside -
DD coating (two-component top coat based on polyu-
rethane varnish - RAL 7035 / light-grey)
Extra charge for design:
Material no. 1.4301 (V2A)
Material no. 1.4571 (V4A)
Position indicator type MSZ
, consisting of a galvanised steel
cable with clamping nipple and position indicator. The me-
chanical position indicator for false ceilings is usable for each
mechanically operated BSK-RPR-EU with hand lever.
Product: SCHAKO
type MSZ
