Smoke extraction blade damper ERK-MB
TECHNICAL DOCUMENTATION
Connection in and to smoke extraction ducts |
Construction subject to change
No return possible
Stand: 2019-10-08 | Page 18
Connection options on the side of the vertical smoke extrac-
tion ducts in accordance with EN 12101-7, inspected
according to EN 1366-8
Figure 21 - Lateral connection to the vertical smoke extraction
duct
1 -- Housing of the ERK-MB
21 -- Smoke extraction duct (in accordance with EN 12101-
7, tested
according to EN 1366-8)
22 -- ERK-MB suspension
24 -- Coarse thread screw ≥ 3.9 × 45, distance ≈ 100 mm
Schematic diagram
possible installation positions (sectional view)
Operating
Required sleeve connections (on site) according to
the mounting position. For connecting the ERK-MB
to the smoke extraction duct used (incl. bonding
with waterglass-based adhesive).
The ERK-MB must be hung separately, indepen-
dently of the smoke extraction duct (pos. 22).