Smoke extraction blade damper ERK-MB
TECHNICAL DOCUMENTATION
Add-on parts |
Construction subject to change
No return possible
Stand: 2019-10-08 | Page 29
ADD-ON PARTS
Security grille ype ASG-E
The security grille type ASG-E is mounted ex works on one
side on the operating side BS (standard). Optionally also pos-
sible on both sides (please specify separately when ordering).
ASG3 = mounted ex works on both sides
ASG4 = 1 piece loose
Model: galvanised sheet steel (mesh width ≤ 20 mm).
Recommendation: mounting ex works
Figure 27 - Security grille type ASG-E
Profile connection frame type PAR
The profile connection frame type PAR can be fitted on one
or two sides (please specify separately when ordering).
PAR1 = mounted ex works on operating side BS
PAR2 = mounted ex works on wall side MS
PAR3 = mounted ex works on both sides
PAR4 = 1 piece loose
PAR5 = 2 pieces loose
Model: galvanised sheet steel.
Recommendation: mounting ex works
Figure 28 - Profile connection frame type PAR
Flexible connection spigot type FS-E
The flexible spigot type FS-E has a temperature resistance of
600°C and is supplied loose as an accessory. For mounting the
FS-E on the smoke extraction blade damper type ERK-MB, the
profile connection frame PAR is required (please specify sepa-
rately when ordering).
Expansion of at least 100 mm when installed must be provi-
ded.
PFS1 = PAR mounted ex works on operating side BS + FS-E loose
PFS2 = PAR mounted ex works on wall side MS + FS-E loose
PFS3 = PAR mounted ex works on both sides + FS-E (2 pieces) loose
PFS4 = PAR + FS-E (1 piece each) loose
PFS5 = PAR + FS-E (2 pieces each) loose
Recommendation: mounting of the PAR ex works
1.)
The required installation dimension is 155 mm.
2.)
clearance of clamping flange
Figure 29 - Flexible connection spigot type FS-E
Flange dimensions / Drill pattern
2.) clearance of clamping flange
Figure 30 - FS-E flange dimensions/drill pattern
DIN 1017 – 30x6 (galvanised)
1.)
2.)
2.)
2.)
2.
)
