Smoke extraction blade damper ERK-MB
TECHNICAL DOCUMENTATION
CE marking |
Construction subject to change
No return possible
Stand: 2019-10-08 | Page 33
Profile connection frame type PAR
, made of galvanised sheet
steel, for connecting flexible spigot type FS-E, security grilles
ASG-E or inspected sheet steel ducts.
o
PAR1 = mounted ex works on operating side BS
o
PAR2 = mounted ex works on wall side MS
o
PAR3 = mounted ex works on both sides
o
PAR4 = 1 piece loose
o
PAR5 = 2 pieces loose
Product:
SCHAKO
type PAR
Dimensions:
Width (W): .................... mm
Height (H):
.................... mm
Flexible spigot type FS-E
, in accordance with EN 12101-7,
tested according to EN 1366-9; with flange strengthener and
screw bolt. Temperature-resistant up to 600°C. Expansion com-
pensation at least 100 mm when mounted. The smoke
extraction blade damper must not be subject to mechanical
stress under any circumstances. For connection to smoke
extraction duct made of sheet steel. Profile connection frame
PAR is required for mounting.
o
PFS1 = PAR mounted ex works on operating side BS + FS-E loose
o
PFS2 = PAR mounted ex works on wall side MS + FS-E loose
o
PFS3 = PAR mounted ex works on both sides + FS-E (2 pieces)
loose
o
PFS4 = PAR + FS-E (1 pieces each) loose
o
PFS5 = PAR + FS-E (2 pieces each) loose
Product:
SCHAKO
type FS-E
Dimensions:
Width (W): .................... mm
Height (H):
.................... mm
Mounting bracket type WE-S
, made of galvanised sheet steel,
dimensions 100 x 100 x 160 mm. Required for installation on
solid smoke extraction shafts made, for example of concrete.
The exact arrangement and number of mounting brackets WE-S
must be selected according to the ERK-MB-V dimensions, see
Table 3 and Table 4 on page 13.
Product:
SCHAKO Mounting bracket type WE-S
Dimensions (W/H according to the dimensions of the smoke
extraction blade damper)
Width (W): .................... mm
Height (H):
.................... mm
The mounting brackets WE-S are delivered only if they have
been explicitly ordered and according to specifications for the
mounting situation.
CE MARKING
Figure 31 - CE marking
19
0761
SCHAKO Klima-Luft
Ferdinand Schad KG
Werk SO / Weidenäcker 9
D-88605 Meßkirch
2019
DoP-ERK-MB-2019-04-01
EN 12101-8:2011
Smoke extraction damper
Multi compartment
Type/version
ERK-MB
Nominal conditions of
activation/response
sensitivity:
Opening/closing during the
the test at the right time
and within the allowed time period
MA -
passed
Response delay/
closing time:
MA -
passed
Operational safety:
10,000 switch
cycles -
passed
Fire resistance:
- Fire integrity - E
- Heat insulation - I
- Smoke tightness - S
- Mechanical
dimensional stability (under E)
- Maintaining the
cross-section (under E)
EI 90 (v
edw
,
h
od
, i↔o) S
1000 C
10000
MA multi
Durability of:
- the response delay
- the operational safety
passed
passed