Smoke extraction blade damper ERK-MB
TECHNICAL DOCUMENTATION
Models and dimensions |
Construction subject to change
No return possible
Stand: 2019-10-08 | Page 4
MODELS AND DIMENSIONS
ERK-MB-S (operation/inspection cover on the side)
Figure 1 - Dimensions ERK-MB-S
ERK-MB-V (operation/inspection cover on the
front)
Figure 2 - Dimensions ERK-MB-V
1 -- Housing of the ERK-MB (50 mm thick)
2 -- Blade dampers (parallel; 40 mm thick)
3 -- Transmission rod of the blade dampers
4 -- Actuator
5 -- Housing of the actuator and transmission rod
incl. inspection cover
Operatio
n
ERK-MB-S
For installation…
…in vertical and horizontal
smoke extraction ducts
made of calcium silicate
(according to EN 12101-7,
inspected according to EN
1366-8)
…on the front of vertical
and horizontal smoke
extraction ducts or on the
side of horizontal smoke
extraction ducts made of
calcium silicate (according
to EN 12101-7, inspected
according to EN 1366-8)
ERK-MB-V
For installation…
…in solid walls
…on solid
smoke extraction shafts
…in dry building walls
…on the front or on the
side of vertical and hori-
zontal smoke extraction
ducts made of calcium sili-
cate (according to EN
12101-7, inspected accord-
ing to EN 1366-8)
MS (wall side
)
BS (operating side)
MS (wall side
)
BS (operation side)
