Smoke extraction blade damper ERK-MB
TECHNICAL DOCUMENTATION
Installation details |
Construction subject to change
No return possible
Stand: 2019-10-08 | Page 9
Installation positions
Arrangement of the ERK-MB-V when installed next to each
other/above each other without clearance
With this arrangement, depending on the dimension and the po-
sitions of the blade damper axles, an additional mounting kit type
MS for connecting the smoke extraction blade dampers is requi-
red. The connections must be made on site. The distance to other
ERK-MB dampers is 200 mm, these dampers may be installed wit-
hout clearance above each other/next to each other (max. 2).
Horizontal position of the blade dampers
Figure 7 - Installation without clearance with blade dampers in
horizontal positions
Vertical position of the blade dampers
Figure 8 - Installation without clearance with blade dampers in
vertical positions
next to each other
above each
other
above each other
next to each other