Smoke extraction damper ERK-SO
TECHNICAL DOCUMENTATION
Add-on parts |
Construction subject to change
No
return
possible
Version:
2017-11-28
|
Page
34
ADD-ON PARTS
Profile connection frame type PAR
The profile connection frame type PAR can be fitted on one
or two sides. Model: galvanised sheet steel.
Please specify separately, when ordering:
o
mounted ex works (recommended), on one side (op-
erating side [BS] (PAR1) or wall side [MS] (PAR2)) or
on both sides (PAR3).
o
delivered loose: 1 piece (PAR4)
2 pieces (PAR5).
Figure 25 - Profile connection frame type PAR
Security grille ype ASG-E
The security grille type ASG-E can be fitted on one or two
sides. Model: galvanised sheet steel.
Please specify separately, when ordering:
o
mounted ex works (recommended), on one side (op-
erating side [BS] (ASG1) or wall side [MS] (ASG2) or
on both sides (ASG3).
o
delivered loose: 1 piece (ASG4)
2 pieces (ASG5)
Figure 26 - Security grille type ASG-E
Recommendation: Mounting of the ASG-E in connection with
the PAR with W or H > 700 mm.
Flexible connection spigot type FS-E
The flexible spigot type FS-E has a temperature resistance of
600°C and is supplied loose as an accessory. Expansion of at
least 100 mm when installed must be provided.
For mounting of the FS-E on the smoke extraction damper
type ERK-SO, the profile connection frame PAR is required.
o
PAR mounted ex works (recommended) + FS-E loose,
on one side (operating side [BS] (PFS1) or wall side
[MS] (PFS2)) or on both sides (PFS3).
o
delivered loose: 1 piece each (PFS4)
2 pieces each (PFS5).
1.)
The required installation dimension is 155 mm.
2.)
clearance of clamping flange
Figure 27 - Flexible connection spigot type FS-E
Flange dimensions / Drill pattern
2.) clearance of clamping flange
Figure 28 - FS-E flange dimensions/drill pattern
DIN 1017 – 30x6 (galvanised)
1.)
2.)
2.)
2.)
2.
)
