Page 19
5.4
Saving several readings (a measurement series) at the same time
To do so:
The device has to be in the Data Log menu (see
).
1. Take several measurements of the same sample material (see
2. To save a reading, press
as soon as the reading
has been taken.
»
The display will now appear as shown in figure
.
This number shows the number of readings that
have already been saved.
3. Press
to enter a name for the saved series
of measurements and to finish the measuring
process.
»
The display will now appear as shown in figure
.
4. The data you have inputted can be overwritten at
any time.
5.
Inputting letters:
Press and hold
to quickly scroll to the
required letter and either press it for 3 seconds or
press
to confirm the selected letter (figure
6.
Inputting numbers:
Press and hold
to quickly scroll to the required number and either press it
for 3 seconds or press
to confirm the selected number.
7.
Moving forward/back:
Press
to switch to another input level. Press
or
to move forward or
back.
8. Confirm your entry by pressing
.
»
The data you entered has been saved.
»
The device automatically determines the average moisture content of the saved
measuring values.
22
23
24
