Page 9
1.
Introduction
1.1
Information about this operating manual
This operating manual is designed to enable you to use the humimeter FS2 safely and
effectively. It is part of the device, has to be stored nearby and must be easily accessi-
ble to users at all times.
All users are required to carefully read and make sure that they have understood this
operating manual before using the humimeter FS2. All of the safety and operating
instructions detailed in this manual have to be observed to ensure the safety of the
device.
1.2
Limitation of liability
All of the information and instructions provided in this operating manual have been
compiled on the basis of the current standards and regulations, the state of the art,
and the extensive expertise and experience of Schaller GmbH.
Schaller GmbH does not accept any liability for damage associated with the following,
which also voids the warranty:
• Non-observance of this operating manual
• Improper use
• Inadequately qualified users
• Unauthorised modifications
• Technical changes
• Use of unapproved spare parts
This fast measuring procedure can be affected by a range of different factors. For this
reason, we recommend periodically checking the device’s measurements with a stan-
dardised oven-drying method.
We, as the manufacturer, do not accept any liability for any incorrect measurements
and associated consequential damage.
