page 10
version 1.2_en
Print saved data (logs)
(only possible with USB data interface module together with
Schaller thermo printer)
To print your saved data, connect the device
to the printer using the printer cable that
was delivered with your device. Carefully
loose the protection cap on the humimeter
PM3. At first plug in the side of the
connector with the close plastic casing at
the humimeter PM3. Then switch on the
device.
Not till then the other side of the cable has
to be plugged in at the printer. Switch on the
printer by pressing . Now the green LED is
blinking. If it does not blink, please change
the batteries and try again.
Press the button at your humimeter until
you reach the menu (see image on the
right). Select „Print Logs“ and confirm by
pressing .
Now you can select if you want to print the
last saved measuring series or all saved
measuring
series
(logs).
Confirm
by
pressing
again. The selected logs are
printed out now.
To save paper, please think of clearing the
data storage regularly.