Page 19
6.2
Saving your readings manually
All of the readings can be saved, edited and viewed on the device. The figure below
shows the overview screen of a single saved series of measurements.
No.
Name
1
Name of the measurement series (editable)
2
Temperature (average)
3
Date & start time of the measurement series
4
Date & end time of the measurement series
5
Number of saved readings
6
Product type
7
Device name
8
Moisture content (average)
6.2.1 Saving individual readings
The device can be configured in such a way that the device will save a reading every
time a button is pressed. This option (manual save active) is the device’s default setting.
Activating the manual save function in the options menu
To do so:
The device has to be switched on and be in the product selection menu.
1. Press
twice or hold for 2 seconds.
2. Select
Options
. To do so, press
or
and con-
firm by pressing
.
3. Select
Log Time
. To do so, press
or
and
confirm by pressing
.
4. Select
Manual
(figure
). To do so, press
or
and confirm by pressing
.
1
2
7
8
3
4
6
5
13
