B1-1
Fig. 1-2
Front Cabinet
CRT PCB
DISASSEMBLY INSTRUCTIONS
1. REMOVAL OF MECHANICAL PARTS
AND P.C. Boards
1-4: MAIN PCB (Refer to Fig. 1-4)
1.
2.
3.
4.
5.
6.
7.
8.
Remove the screw (1).
Remove the Main PCB Holder.
Remove the screw (2).
Remove the TV PCB Holder.
Remove the 2 screws (3).
Remove the 3 screws (4).
Disconnect the following connectors:
(CP403, CP810 and CP820).
Remove the Main PCB in the direction of arrow.
Fig. 1-4
1-1: BACK CABINET (Refer to Fig. 1-1)
1.
2.
3.
4.
Remove the 6 screws (1).
Remove the 2 screws (2) which are used for holding the
Back Cabinet.
Remove the AC cord from the AC cord hook (3).
Remove the Back Cabinet in the direction of arrow.
1-2: CRT PCB (Refer to Fig. 1-2)
CAUTION: BEFORE REMOVING THE ANODE CAP,
DISCHARGE ELECTRICITY BECAUSE IT
CONTAINS HIGH VOLTAGE.
BEFORE ATTEMPTING TO REMOVE OR
REPAIR ANY PCB, UNPLUG THE POWER
CORD FROM THE AC SOURCE.
1.
2.
3.
Remove the Anode Cap.
(Refer to REMOVAL OF ANODE CAP)
Disconnect the following connectors:
(CP802 and CP850).
Remove the CRT PCB in the direction of arrow.
1-3: TV/VCR BLOCK (Refer to Fig. 1-3)
1.
2.
3.
4.
Remove the 2 screws (1).
Disconnect the following connectors:
(CP401, CP501, CP502, CP4202 and CP4203).
Unlock the support (2).
Remove the TV/VCR Block in the direction of arrow.
Fig. 1-3
(1)
Main PCB Holder
VCR Block
Main PCB
(3) (4)
(3)
(4)
(4)
(2)
TV PCB Holder
Front Cabinet
UP TO
RELEASE
TV/VCR Block
(2)
(1)
(1)
Front Cabinet
Back Cabinet
(1)
(1)
(1)
(1)
(2)
(1)
(2)
(3)
(1)
Fig. 1-1
Summary of Contents for SL0521KO
Page 76: ...M5D6 08G U2Y5548 SPEC NO O R NO ...
Page 77: ......
