EN
23
1– Install the appliance in a cool, well ventilated room, but not in direct sunlight and
not near heat sources (radiator, cooker.. etc. ). If you install it near heat sources,
use an insulating plate.
2– Allow warm food and drinks to cool down before putting them in the refrigerator
or freezer compartment.
3– When thawing frozen food, place it in the refrigerator compartment. The low
temperature of the frozen food will help to cool the refrigerator compartment
while it is thawing, reducing the energy required.
4– When placing liquids in the appliance, make sure they are covered. Otherwise
humidity increases inside the appliance and the time taken to cool them is longer.
Also covering drinks and liquids helps preserve the smell and taste.
5– When placing food and drinks in the appliance, open and close the appliance
door as quickly as possible to keep the temperature inside the appliance stable.
6– Keep the covers closed of any compartments with different temperature
requirements in the appliance (crisper, chiller ...etc. ).
7– Make sure the door gasket is clean and pliable. Replace gaskets if they are
worn or damaged.
TIPS FOR SAVING ENERGY
