2
Situation: 25.11.2009
805.031 BA / EN
Instruction Manual Power Supply Unit CSV 300
1
Introduction
This instruction manual contains important information for the safe operation
of the power supply unit. It is essential to read and to follow the given safety
information.
The instruction manual should always be kept in the motorhome/caravan. All
safety information must be passed on to other users.
The reproduction, translation and duplication of this manual, even in parts, is
not allowed without written authorization.
2
Safety information
The design of the power supply unit is state-of-the-art and according to
approved safety technology. Nevertheless, if the safety information in this
instruction manual is not closely followed, persons might be injured or the
power supply unit might be damaged.
Do not use the power supply unit if it is not in technically good condition. The
instruction manual must be followed.
Any technical faults affecting the safety of persons or of the power supply unit
must be dealt with immediately by qualified personnel.
▲
Failure to comply with this sign may lead to the endangerment of per-
sons.
▲
Failure to comply with this sign may damage the device or the connected
consumers.
▲
This sign indicates recommendations or special features.
▲
The electrical system of the motorhome or the caravan has to meet
current DIN, VDE and ISO regulations. Manipulations of the electrical
system will endanger the safety of persons and the vehicle, and are
therefore prohibited.
▲
Never make any modifications to the power supply unit.
▲
The electrical connection may only be established by qualified person-
nel and must be carried out according to the Schaudt installation
instructions.
▲
Connection work is to be carried out in tensionless condition only.
▲
Risk of fatal injury due to electric shock or fire in the case of a defective
mains cable or incorrect connection!
▲
Connect the power supply unit to the 230 V mains in compliance with
national installation regulations.
▲
Risk of fatal injury!
Never perform maintenance on the power supply unit when it is live.
▲
Blown fuses must only be replaced when the cause of the fault is
known and eliminated.