Operating manual for caravan-charging system CSV 410
3
Date: 20.02.2020
8050102 BA / EN
Y
DANGER!
Incorrect installation
Electric shock or damage to connected devices:
F
Install as shown in installation instructions.
F
The mains connection line may only be replaced by an authorised cu-
stomer service department or by those qualified.
Y
WARNING!
Hot components
Burns:
F
Blown fuses may only be changed after the power to the system has
been disconnected.
F
Blown fuses may only be replaced once the cause of the fault is
known and has been rectified.
F
Never bypass or repair fuses.
F
The back of the device can get hot during operation. Do not touch it.
F
Only use original fuses rated as specified on the device.
F
Never store heat sensitive objects close to the device (e.g. tempera-
ture sensitive clothes if the device has been installed in a wardrobe).
3 Application and function
Y
This device is not intended to be used by persons (including children)
with limited physical, sensory or mental aptitude or lack of experience
and/or knowledge unless they are supervised by a person responsible for
their safety or have received instruction from this person as to how the
device is used.
Children must be supervised to ensure they do not play with the device.
This device is intended for installation into a vehicle.
CSV 410
+ --
+ --
Caravan charging system
230V AC
12V consumers
Caravan battery
Starter battery
Lighting
Pump
Heater
etc.
LR ...
Solar regulator
(accessory)
Towing vehicle
Control and
switch panel model
ST or LT
Fig. 1
On-board power supply system
