SCHEMPP-HIRTH FLUGZEUGBAU GmbH, KIRCHHEIM/TECK
Arcus M
FLIGHT MANUAL
(11) Rip cord anchorage (not illustrated)
Front seat:
Red steel ring on tubular frame between the seats on
the left
Rear seat:
Red steel ring at the front of the steel tube center (not
illustrated)
frame on the left
(12) Canopy
The one-piece plexiglass canopy hinges sideways on flush fittings.
Take care that the cable restraining the open canopy is properly hooked up.
(13) Canopy locking and jettisoning levers (not illustrated)
Lever with red grip for either seat on the canopy frame on the left.
Forward position: canopy locked
To open or jettison the canopy, swing one of the levers back up to the
stop (approx. 90°) and raise canopy.
(14) Canopy release
Black lever (for front and rear seat) in the canopy frame on the right.
To open or jettison the canopy, push one of the levers back up to the
stop, disconnect the holding rope and raise canopy.
October 2011
Revision --
7.2.6
