SCHEMPP-HIRTH FLUGZEUGBAU GmbH, KIRCHHEIM/TECK
Arcus M
FLIGHT MANUAL
o
The canopy should be cleaned with a plexiglass cleaner (e.g. "Mirror
Glaze", "Plexiklar” or similar) or with warm water if necessary.
The canopy should be wiped down with a soft clean chamois leather or
a very soft material such as cotton.
N e v e r rub the canopy when it is dry!
o
The powered sailplane should always be protected from the wet.
If water is found inside, the components should be stored in a dry
environment and turned frequently to eliminate the water.
o
The powered sailplane should not be exposed unnecessarily to intense
sunlight or heat and should not be subjected to continual mechanical
loads.
WARNING:
All external portions of the powered sailplane exposed to sunlight must be
painted white with the exception of the areas for the registration and
anti-collision markings.
Colours other than white can lead to the CFRP/ GFRP overheating in direct
sunlight, resulting in insufficient strength.
ctober 2011
8.5.2
O
Revision --
