Scheppach 5808401984, Translation From The Original Instruction Manual

Keep unauthorised persons and children away from the 

device!

The machine has protective insulation!

Caution!

The protection class is retained only if original insulating 

material is used during maintenance and the insulation dis-

tances are not changed.

Pull the power plug out before cleaning or maintenance!

Size: 20 (mm)     40 (mm)

Ø 25 mm

129 x 70

The concrete mixer can be operated only with fully closed 

protection device!

Wear protective clothes!

Do not put your hands into the moving drum!

Caution!

Risk of getting crushed at the sprocket

Installation help!

See: Installation, installing the upper section of the drum 

(Fig.6)

Correct use according to manufacturer´s instructions 

m

The  machine  corresponds  to  the  applicable 

EC Machine Directive.

•  The concrete mixer is intended exclusively for 

private use at home and in the garden.

•  It should be operated only within the frame-

work of the technical data.

•  The concrete mixer is meant exclusively for the 

production of concrete and mortar. 

•  The applicable accident prevention rules and 

the other generally recognised technical safety 
regulations must be observed.

•  The machine may be used, serviced or re-

paired only by persons who are familiar with it 
and are instructed about its risks. Arbitrary al-

terations in the machine will free the manufac-
turer from any liability for the resulting damage.

•  The machine is to be used only with the manu-

facturer’s original accessories and  original 
tools. 

•  Any use that goes beyond this will be treated 

as improper use. The manufacturer will not be 
responsible for damage resulting from improp-
er use; the risk will be borne solely by the user.

Caution!  The  Following  Actions  are  Forbid

-

den:

Operation in atmosphere that is exposed to 

the risk of explosion

Use in the food products industry 

Mixing  explosive,  combustible  and  health-

endangering substances. 

Warning! 

This electric tool generates an elec-

tromagnetic field during operation. This field can 

impair active or passive medical implants under 
certain conditions. In order to prevent the risk of 
serious or deadly injuries, we recommend that 
persons with medical implants consult with their 
physician and the manufacturer of the medical 
implant prior to operating the electric tool.

Residual risks 

m

The machine is built on the basis of the latest 

technology and in accordance with the rec

-

ognised technical safety rules. Nevertheless, 

individual  residual  risks  can  occur  while 

working.

•  Risk of injury from rotating parts

•  Risk from power where improper electrical 

connecting cables are used

•  Further, indeterminate residual risks may re-

main even after taking all relevant preventive 
measures.

•  Residual risks can be minimised if the safety 

instructions and conditions for proper use, 
as well as the operating instructions, are ob-
served

Electrical connection 

m

The installed electric motor is connected in op-
eration-ready condition. The connection corre-
sponds to the common VDE and DIN provisions.
The customer-side mains connection, as well as 
the used extension cable, must correspond to 

these specifications.

Important Instructions

In case of overload, the motor is switched off au-
tomatically.

•  The motor can be activated again after a cool-

ing period (different times for different models).

Damaged Electrical Connecting Cables

Electrical connecting cables frequently experi-
ence insulation damage.

The causes are:

•  Pressure points, if connecting cables are rout-

ed through windows or doors.

•  Kinks, due to improper mounting or routing of 

the connecting cables.

•  Cuts due to connecting cables being run over.

•  Insulation damages due to tearing away from 

the wall socket.

15

D

GB