www.scheppach.com
22 | GB
4.
Safety instructions
General power tool safety warnings
m
WARNING! Read all safety warnings, instruc
-
tions, illustrations and specifications provided
with this power tool.
Failure to follow all instructions
listed below may result in electric shock, fire and/or se
-
rious injury.
Save all warnings and instructions for future ref
-
erence.
The term “power tool” in the warnings refers to your
mains-operated (corded) power tool or battery-operat
-
ed (cordless) power tool.
1.
Work area safety
a) Keep work area clean and well lit.
Cluttered or
dark areas invite accidents.
b) Do not operate power tools in explosive at-
mospheres, such as in the presence of flam
-
mable liquids, gases or dust.
Power tools create
sparks which may ignite the dust or fumes.
c) Keep children and bystanders away while op-
erating a power tool.
Distractions can cause you
to lose control.
2.
Electrical safety
a) Power tool plugs must match the outlet. Nev-
er modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools.
Unmodified plugs and matching outlets will
reduce risk of electric shock.
b) Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators.
There is an increased risk of elec-
tric shock if your body is earthed or grounded.
c) Do not expose power tools to rain or wet con-
ditions.
Water entering a power tool will increase
the risk of electric shock.
d)
Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges or
moving parts.
Damaged or entangled cords in-
crease the risk of electric shock.
e) When operating a power tool outdoors, use an
extension cord suitable for outdoor use.
Use of
a cord suitable for outdoor use reduces the risk of
electric shock.
f) If operating a power tool in a damp location
is unavoidable, use a residual current device
(RCD) protected supply.
Use of an RCD reduces
the risk of electric shock.
m
Important!
The equipment and packaging material are not toys.
Do not let children play with plastic bags, foils or small
parts. There is a danger of swallowing or suffocating!
3. Proper use
CE tested machines meet all valid EC machine
guidelines as well as all relevant guidelines for
each machine.
•
The machine must only be used in technically per
-
fect con dition in accordance with its designated use
and the in structions set out in the operating manu-
al, and only by safety-conscious persons who are
fully aware of the risks involved in operating the
machine. Any functional dis orders, especially those
affecting the safety of the machine, should therefore
be rectified immediately.
•
Any other use exceeds authorization. The manufac
-
turer is not responsible for any damages resulting
from unauthorized use; risk is the sole responsibility
of the operator.
•
The safety, work and maintenance instructions of
the manufacturer as well as the technical data giv-
en in the calibrations and dimensions must be ad-
hered to.
• Relevant accident prevention regulations and oth-
er, gene rally recognized safety-technical rules must
also be adhered to.
•
The machine may only be used, maintained, and
operated by persons familiar with it and instructed in
its operation and procedures. Arbitrary alterations
to the machine release the manufacturer from all
responsibility for any resulting damages.
•
The machine may only be used with original acces
-
sories and tools made by the manufacturer.
•
The machine may not be operated with sanding
belts.
Please note that our equipment has not been designed
for use in commercial, trade or industrial applications.
Our warranty will be voided if the equipment is used
in commercial, trade or industrial businesses or for
equivalent purposes.
