15
www.scheppach.com
service@scheppach.com
+(49)-08223-4002-99
+(49)-08223-4002-58
www.scheppach.com
service@scheppach.com
+(49)-08223-4002-99
+(49)-08223-4002-58
General Power Tool Safety Warnings
m
WARNING! Read all safety warnings and all ins
-
tructions.
Failure to follow the warnings and instruc
-
tions may result in electric shock, fire and/or serious
injury.
Save all warnings and instructions for future refe-
rence.
The term „power tool“ in the warnings refers to your
mains-operated (corded) power tool or battery-opera
-
ted (cordless) power tool.
Work area safety
•
Keep work area clean and well lit.
Cluttered or
dark areas invite accidents.
•
Do not operate power tools in explosive atmos-
pheres, such as in the presence of flammable
liquids, gases or dust.
Power tools create sparks
which may ignite the dust or fumes.
•
Keep children and bystanders away while ope-
rating a power tool.
Distractions can cause you to
lose control.
Electrical safety
•
Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any ad-
apter plugs with earthed (grounded) power tools.
Unmodified plugs and matching outlets will reduce
risk of electric shock.
•
Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, cookers and
refrigerators.
There is an increased risk of electric
shock if your body is earthed or grounded.
•
Do not expose power tools to rain or wet condi-
tions.
Water entering a power tool will increase the
risk of electric shock.
•
Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges or
moving parts.
Damaged or entangled cords increa-
se the risk of electric shock.
•
When operating a power tool outdoors, use an
extension cord suitable for outdoor use.
Use of
a cord suitable for outdoor use reduces the risk of
electric shock.
•
If operating a power tool in a damp location is
unavoidable, use a residual current device (RCD)
protected supply.
Use of an RCD reduces the risk
of electric shock.
Personal safety
•
Stay alert, watch what you are doing and use
common sense when operating a power tool. Do
not use a power tool while you are tired or under
the influence of drugs, alcohol or medication.
A
moment of inattention while operating power tools
may result in serious personal injury.
•
Use personal protective equipment.
Always wear
eye protection. Protective equipment such as dust
mask, non-skid safety shoes, hard hat, or hearing
protection used for appropriate conditions will redu
-
ce personal injuries.
•
Prevent unintentional starting. Ensure the switch
is in the off-position before connecting to power
source and/or battery pack, picking up or carry
-
ing the tool.
Carrying power tools with your finger
on the switch or energising power tools that have
the switch on invites accidents.
•
Remove any adjusting key or wrench before tur
-
ning the power tool on.
A wrench or a key left at
-
tached to a rotating part of the power tool may result
in personal injury.
•
Do not overreach. Keep proper footing and ba-
lance at all times.
This enables better control of the
power tool in unexpected situations.
•
Dress properly. Do not wear loose clothing or
jewellery. Keep your hair, clothing and gloves
away from moving parts.
Loose clothes, jewellery
or long hair can be caught in moving parts.
•
If devices are provided for the connection of
dust extraction and collection facilities, ensure
these are connected and properly used.
Use of
dust collection can reduce dust-related hazards.
Power tool use and care
•
Do not force the power tool. Use the correct po-
wer tool for your application.
The correct power
tool will do the job better and safer at the rate for
which it was designed.
•
Do not use the power tool if the switch does not
turn it on and off.
Any power tool that cannot be
controlled with the switch is dangerous and must be
repaired.
•
Disconnect the plug from the power source and/
or the battery pack from the power tool before
making any adjustments, changing accessories,
or storing power tools.
Such preventive safety
measures reduce the risk of starting the power tool
accidentally.
•
Store idle power tools out of the reach of child-
ren and do not allow persons unfamiliar with the
power tool or these instructions to operate the
power tool.
Power tools are dangerous in the hands
of untrained users.
•
Maintain power tools. Check for misalignment or
binding of moving parts, breakage of parts and
any other condition that may affect the power
tool’s operation. If damaged, have the power tool
repaired before use.
Many accidents are caused by
poorly maintained power tools.
•
Keep cutting tools sharp and clean.
Properly
maintained cutting tools with sharp cutting edges are
less likely to bind and are easier to control.
•
Use the power tool, accessories and tool bits
etc. in accordance with these instructions, ta-
king into account the working conditions and the
work to be performed.
Use of the power tool for
operations different from those intended could result
in a hazardous situation.
