Scheppach 5903304901, Instruction Manual

english 9

Manufacturer:

scheppach

Fabrikation von Holzbearbeitungsmaschinen GmbH

Günzburger Straße 69

D-89335 Ichenhausen

Dear customer,

we wish you a pleasant and successful working experi-

ence with your new Kity machine.

According to the applicable product liability law the man-

ufacturer of this device is not liable for damages which 

arise on or in connection with this device in case of:

•  improper handling,

•  non-compliance with the instructions for use,

•  repairs by third party, non authorized skilled workers,

•  installation and replacement of non-original spare parts,

•  improper use,

• failures of the electrical system due to the non-

compliance  with  the  electrical  specifications  and  the 

VDE 0100, DIN 57113 / VDE 0113 regulations

Recommendations:

Read the entire text of the operating instructions prior to 

the assembly and operation of the device.

These operating instructions are intended to make it eas-

ier for you to get familiar with your device and utilize its 

intended possibilities of use.

The operating instructions contain important notes on 

how to work safely, properly and economically with your 

machine and how to avoid dangers, save repair costs, re-

duce downtime, and increase the reliability and working 

life of the machine.

In addition to the safety regulations contained herein, you 

must in any case comply with the applicable regulations of 

your country with respect to the operation of the machine.

Put the operating instructions in a clear plastic folder to 

protect them from dirt and humidity, and store them near 

the machine. The instructions must be read and carefully 

observed by each operator prior to starting the work. Only 

persons who have been trained in the use of the machine 

and have been informed on the related dangers and risks 

are allowed to use the machine. The required minimum 

age must be met.

In addition to the safety notes contained in the present 

operating instructions and the special regulations of your 

country, the generally recognized technical rules for the 

operation of wood working machines must be observed.

General Notes

•  When you unpack the device, check all parts for pos-

sible transport damages. In case of complaints the sup-

plier is to be informed immediately. Complaints received 

at a later date will not be acknow ledged.

•  Check the delivery for completeness.

•  Read the operating instructions to make yourself famil-

iar with the device prior to using it.

•  Only use original Kity parts for accessories as well as 

for wearing and spare parts. Spare parts are available 

from your specialized dealer.

•  Specify our part numbers as well as the type and year 

of construction of the device in your orders.

Bts800

Delivery Status

Belt/Disc Sanding machine

Sanding Disc

Disc Guard

Accessory Bag

Operation Manual

Technical Data
Dimensions  

L x W x H mm

475/365/325

ø Disc mm

150

RPM Disc

2850

Belt 

dimensions 

mm

100 x 915

Belt Speed m/s

7,5

Belt Tilt

0°-90°

Table Size mm

215 x 146

Table Tilt

0°-45°

Gewicht kg

21.5

Drive
Motor V~/Hz

230–240/50

Input P1 W

370

Subject to technical changes!

Noise

Total vibration values determined in accordance with 

EN 61029.

sound pressure level L

pA

85 dB(A)

uncertainty K

pA

3 dB

sound power level L

WA

96 dB(A)

uncertainty K

WA

3 dB

Wear hearing protection.

The effects of noise can cause a loss of hearing. Total 

vibration values (vector sum - three directions) deter-

mined in accordance with EN 61029.

FEATURES

SANDING DISC:

 A round sanding disc located on the 

side of the belt/disc sander.

TRACKING KNOB: 

A tracking knob aids in centering the 

sanding belt.

WORK SUPPORT: 

Supports the workpiece on the sand-

ing belt.

WORKTABLE: 

Equipped with a sturdy, worktable that 

provides a stable surface when using either the disc sand-

ing or the belt sanding feature.

BEVEL GAUGE: 

The worktable comes equipped with a 

bevel gauge that indicates the degrees the worktable can 

be tilted up to 45°.

BELT TENSION LEVER: 

The belt tension lever releases 

the belt tension for easy belt replacement.

HORIZONTAL AND VERTICAL POSITION HOLES: 

The 

horizontal and vertical position holes are used for chang-

ing the position of the belt from horizontal to vertical.

SANDING BELT: 

The sanding belt can be adjusted from 

horizontal to vertical providing different positions for sand-

ing workpieces of different shapes and sizes.