Scheppach 5904403901, Translation Of Original Instruction Manual



 www.scheppach.com / 



 service@scheppach.com / 



 +(49)-08223-4002-99 / 



 +(49)-08223-4002-58

22 | GB

7.  Before starting the equipment

m

 IMPORTANT!

You must fully assemble the appliance before 

using it for the first time!

•  Open the packaging and remove the device care-

fully.

•  Remove the packaging material as well as the 

packaging and transport bracing (if available).

•  Check that the delivery is complete.
•  Check the device and accessory parts for transport 

damage

•  Check the device and accessory parts for transport 

damage. 

•  When complaints the dealer must be informed im-

mediately. Subsequent complaints will not be ac-
cepted

•  If possible, store the packaging until the warranty 

period has expired

•  Read the operating instructions to make yourself 

familiar with the device prior to using it.

•  Only use original parts for accessories as well as 

for wearing and spare parts. Spare parts are avail-
able from your specialized dealer.

•  Specify our part numbers as well as the type and 

year of construction of the device in your orders.

•  Before you connect the equipment to the power 

supply make sure the data on the rating plate are 
identical to the mains data.

m

 WARNING!

The device and packaging materials are not toys! 

Children must not be allowed to play with plas-

tic bags, film and small parts! There is a risk of 

swallowing and suffocation!

8.  Montage

m

 WARNING!

Always pull the power plug before making adjust-

ments to the equipment.

1.  Mounting the support feet (Fig. C)
•  Turn the chopper so that you can turn the support 

feet 180°.

•  Insert the axle shaft (13) into the intended position 

on the support feet. (Fig. D)

2.  Mounting the wheels (Fig. E/F)
•  Mount both wheels as shown in Fig. F. Use the sup-

plied tool to tighten the wheel. NOTE: If the axle 
rotates when tightened, use the Allen wrench (b) to 
hold it in place.

•  After tightening the lock nut (14), mount the wheel 

cap (17) onto the wheel (7). The position is indicat-
ed by the grooves (18).

Residual risks

The machine has been built according to the state of 
the art and the recognised technical safety require-
ments. However, individual residual risks can arise 
during operation.

•  The use of incorrect or damaged mains cables can 

lead to injuries caused by electricity.

•  Release the handle button and switch off the ma-

chine prior to any operations.

•  Even if you use this electric power tool in accord-

ance to instructions, certain residual risks cannot 
be eliminated.

•  Remaining hazards can be minimized by following 

the instructions in „Safety instructions“, „Intended 
Use“ and in the entire operating manual.

•  Avoid accidental starts: do not press the start but-

ton while inserting the plug into the socket.

•  Use the tool that is recommended in this manual. 

In doing so, your machine provides optimal perfor-
mance.

•  Hands may never enter the processing zone when 

the machine is in operation.

6.  Technical data

Dimensions L x W x H 

650 x 455 x 910 mm 

Blade cylinder Ø 

90 mm

Number of blades

8

Collection box capacity 

60 l

Transport wheels Ø 

175 mm

Weight (kg)

19,0 kg

Branch thickness max Ø 

44 mm

Motor 

230-240V~ 50Hz

Nominal consumption P1 

2800 W

Blade cylinder revolutions

60 (1/min)

Operating type

P40

Subject to technical changes!

Noise levels

Guaranteed sound power level L

WA 

94 dB(A)

Measured sound power level L

WA

91,7 dB(A)

Measurement uncertainty K

2,67 dB(A)

Sound pressure level L

pA 

79,1 dB(A)

Measurement uncertainty K

pA 

3 dB(A)

Note: 

The  specified  sound  levels  have  been  deter

-

mined using a standardised test procedure and can 
be used to compare different electronic devices. Fur-
thermore, these values can be used to assess in ad-
vance the strain on the user caused by the sound.