Scheppach 5905801917, Original Instruction Manual

www.scheppach.com

GB | 19 

1.  Introduction

Manufacturer:

Scheppach GmbH
Günzburger Straße 69
D-89335 Ichenhausen

Dear Customer

We hope your new tool brings you much enjoyment and 
success.

Note:

In accordance with the applicable product liability laws, 
the manufacturer of this device assumes no liability for 
damage to the device or caused by the device arising 
from:
•  Improper handling
•  Failure to comply with the operating manual,
•  Repairs carried out by third parties, unauthorised 

specialists

•  Installing and replacing non-original spare parts,
•  Improper use
•  Failures of the electrical system in the event of the 

electrical regulations and VDE provisions 0100, DIN 
57113 / VDE 0113 not being observed

Note:

Read the whole text of the operating manual before as-
sembly and commissioning.
This operating manual should help you to familiarise 
yourself with your device and to use it for its intended 
purpose.
The operating manual includes important instructions 
for safe, proper and economic operation of the device, 
for avoiding danger, for minimising repair costs and 
downtimes, and for increasing the reliability and ex-
tending the service life of the device.
In addition to the safety instructions in this operating 
manual, you must also observe the regulations appli-
cable to the operation of the device in your country.
Keep the operating manual at the device, in a plastic 
sleeve, protected from dirt and moisture. They must be 
read and carefully observed by all operating personnel 
before starting the work.
The device may only be used by personnel who have 
been trained to use it and who have been instructed 
with respect to the associated hazards. 
The required minimum age must be observed.

In addition to the safety instructions in this operating 
manual and the separate regulations of your country, 
the generally recognised technical rules relating to the 
operation of such machines must also be observed.
We accept no liability for accidents or damage that 
occur due to a failure to observe this manual and the 
safety instructions.

2. 

Device description (Fig. 1)

1.  Filter tank
2.  Locking mechanism
3.  Twist-clean
4.  Cover
5.  Rotary switch
6.  Filter outlet
7.  Filter inlet
8.  Hose
9.  Pump outlet
10.  Pump
11.  Sight glass
12.  Filter drain
13.  Clogging indicator
14.  Filter element

3. 

Scope of delivery

a.  Pump
b.  Hose
c. 

Pressure filter

d.  Pump connection 3/4”
e.  3 x hose clamp
f.  2 x union nut
g.  2 x sealing ring
h. 

2 x filter connection 1”

i. 

2 x filter connection 3/4”

j.  Twist-clean crank
k.  Operating manual

4.  Proper use

The machine may only be used in the intended manner. 
Any use beyond this is improper. The user/operator, not 
the manufacturer, is responsible for damages or inju-
ries of any type resulting from this.

An element of the intended use is also the observance 
of the safety instructions, as well as the assembly in-
structions and operating information in the operating 
manual.