www.scheppach.com /
service@scheppach.com /
+(49)-08223-4002-99 /
+(49)-08223-4002-58
GB | 39
The paint pattern is tailing.
The pressure control dial (9) is set too
low.
Increase the pressure control dial (9) to a higher
setting.
Mesh filter handle (26), the spray tip (5),
or the suction hose mesh filter (13) is
clogged.
Clean mesh filter handle (26), the spray tip (5),
and the suction hose mesh filter (13).
The suction hose (11) is loose at the
suction hose inlet port (15).
Re-adjust the suction hose (11) to the suction
hose inlet port (15) and use a flat head screw
-
driver to tighten the screw on the metal hose
clamp suction hose inlet port (16).
The spray tip (5) is worn.
Replace the spray tip (5).
The paint is too thick.
Thin the paint according to the
manufacturer's instructions.
