Scheppach 59061129933, Original Instruction Manual



 www.scheppach.com / 



 service@scheppach.com / 



 +(49)-08223-4002-99 / 



 +(49)-08223-4002-58

GB | 15 

We accept no liability for damage or accidents which 

arise due to non-observance of these instructions 

and the safety information.

Nous déclinons toute responsabilité pour les acci-

dents ou les dommages causés par le non-respect 

de ce manuel et des consignes de sécurité.

2.  Device description (Fig. 1)

1.  Transport handle

2.  Pressure switch

3.  Pressure regulator

4.  Quick-lock coupling

5.  Pressure gauge

6.  Pressure vessel

7.  Supporting foot

8.  Drain plug for condensation water

9.  Wheel hub bolt

10. Wheel

11. Housing cover

12. ON/OFF switch

13. Safety valve

A.  Supporting foot

B.  Washer

C.  Locking ring

D.  Fixing nut

E.  Mounting screw

3.  Scope of delivery

•  Open the packaging and remove the device care-

fully.

•  Remove the packaging material as well as the 

packaging and transport bracing (if available).

•  Check that the delivery is complete.

•  Check the device and accessory parts for transport 

damage.

•  If possible, store the packaging until the warranty 

period has expired.

m

 ATTENTION!

The device and packaging materials are not toys! 

Children must not be allowed to play with plastic 

bags, film and small parts! There is a risk of swal

-

lowing and suffocation!

•  compressor

•  manual

•  2 wheels

•  supporting foot

•  assembly material

•  air tool set 13 pcs.

•  air hose (shown Fig.3 / 6 / 8)

1.  Introduction

Manufacture

scheppach

Fabrikation von Holzbearbeitungsmaschinen GmbH

Günzburger Straße 69

D-89335 Ichenhausen

Dear Customer,

we hope your new tool brings you much enjoyment 

and success.

NOTE:

According to the applicable product liability laws, the 

manufacturer of the device does not assume liability 

for damages to the product or damages caused by 

the product that occurs due to:

•  Improper handling,

•  Non-compliance of the operating instructions,

•  Repairs by third parties, not by authorized service 

technicians,

•  Installation and replacement of non-original spare 

parts,

• 

Application other than specified,

•  A breakdown of the electrical system that occurs 

due to the non-compliance of the electric regu-

lations and VDE regulations 0100, DIN 57113 / 

VDE0113.

We recommend:

Read through the complete text in the operating in-

structions before installing and commissioning the 

device. The operating instructions are intended to 

help the user to become familiar with the machine 

and take advantage of its application possibilities in 

accordance with the recommendations. The operat-

ing instructions contain important information on how 

to operate the machine safely, professionally and 

economically, how to avoid danger, costly repairs, re-

duce downtimes and how to increase reliability and 

service life of the machine.

In addition to the safety regulations in the operating 

instructions, you have to meet the applicable regula-

tions that apply for the operation of the machine in 

your country. Keep the operating instructions pack-

age with the machine at all times and store it in a 

plastic cover to protect it from dirt and moisture. Read 

the instruction manual each time before operating the 

machine and carefully follow its information. The ma-

chine can only be operated by persons who were in-

structed concerning the operation of the machine and 

who are informed about the associated dangers. The 

minimum age requirement must be complied with.

In addition to the safety notices contained in this op-

erating manual and the particular instructions for your 

country, the generally recognised technical regula-

tions for the operation of identical devices must be 

complied with.