Scheppach 59061129933, Original Instruction Manual



 www.scheppach.com / 



 service@scheppach.com / 



 +(49)-08223-4002-99 / 



 +(49)-08223-4002-58

GB | 17 

•  Do not heat up paints or solvents. There is a risk of 

explosion!

•  If hazardous liquids are processed, wear protective 

filter units (face guards). Also, adhere to the safety 

information provided by the manufacturers of such 

liquids.

•  The details and designations of the Ordinance on 

Hazardous Substances, which are displayed on the 

outer packaging of the processed material, must be 

observed.

•  Additional protective measures are to be undertak-

en if necessary, particularly the wearing of suitable 

clothing and masks.

•  Do not smoke during the spraying process and/or 

in the work area. There is a risk of explosion! Paint 

vapors are easily combustible.

•  Never set up or operate the equipment in the vicin-

ity of a fire place, open lights or sparking machines.

•  Do not store or eat food and drink in the work area. 

Paint vapors are harmful to your health.

•  The work area must exceed 30 m

3

  and  sufficient 

ventilation must be ensured during spraying and 

drying. Do not spray against the wind. Always ad-

here to the regulations of the local police authority 

when spraying combustible or hazardous materi-

als.

•  Do not process media such as white spirit, butyl 

alcohol and methylene chloride with the PVC pres-

sure hose.These media will destroy the pressure 

hose.

Operating pressure vessels

•  You must keep your pressure vessel in good work-

ing order, operate the vessel correctly, monitor the 

vessel, carry out necessary maintenance and re-

pair work immediately and meet the relevant safety 

precautions.

•  The supervisory authority may enforce essential 

control measures in individual cases.

•  A pressure vessel is not allowed to be used if it has 

faults  or  deficiencies  that  can  endanger  workers  or 

third parties.

•  Check the pressure vessel for signs of rust and 

damage each time before using. Do not use the 

compressor with a damaged or rusty pressure ves-

sel. If you discover any damage, then please con-

tact the customer service workshop.

Do not lose these safety instructions

WARNING!

 This electric tool generates an electro-

magnetic field during operation. This field can impair 

active or passive medical implants under certain 

conditions. In order to prevent the risk of serious or 

deadly injuries, we recommend that persons with 

medical implants consult with their physician and the 

manufacturer of the medical implant prior to operat-

ing the electric tool.

15. 

Have  your  electric  tool  repaired  by  a  qualified 

electrician

 - This electric tool conforms to the applicable 

safety regulations. Repairs may only be per-

formed by an electrician using original spare 

parts. Otherwise accidents can occur.

16. Important!

 - For your own safety you must only use the ac-

cessories and additional units listed in the oper-

ating instructions or recommended or specified 

by the manufacturer. The use of mounted tools 

or accessories other than those recommended 

in the operating instructions or catalog may 

place your personal safety at risk.

17. Noise

 -

Wear ear muffs when you use the compressor.

18. Replacing the power cable

 - To prevent hazards, leave the replacement of 

damaged power cables strictly to the manufac-

turer or a qualified electrician. There is a risk of 

electric shock!

19. 

Inflating tires

 -

Directly after inflating tires, check the pressure 

with a suitable pressure gauge, for example at 

your filling station.

20. Roadworthy compressors for building site opera-

tions

 -

Make sure that all lines and fittings are suitable 

for the maximum permissible operating pressure 

of the compressor.

21. Place of installation

 - Set up the compressor on an even surface.

Additional safety instructions

Safety instructions for working with compressed 

air and blasting guns

•  The compressor pump and lines can become very 

hot during operation. Touching these parts will burn 

you.

•  The air which is sucked in by the compressor must 

be kept free of impurities that could cause fires or 

explosions in the compressor pump.

•  When releasing the hose coupling, hold the hose 

coupling piece with your hand. This way, you can 

protect yourself against injury from the rebounding 

hose.

•  Wear safety goggles when working with the blow-

out  pistol.  Foreign  bodies  or  blown  off  parts  can 

easily cause injuries.

•  Do not blow at people with the blow-out pistol and 

do not clean clothes while being worn. Risk of in-

jury!

Safety information for paint spraying

• 

Do not process any paints or solvents with a flash 

point below 55° C. There is a risk of explosion!