Scheppach 5906115924, Translation Of Original Instruction Manual



 www.scheppach.com / 



 service@scheppach.com / 



 +(49)-08223-4002-99 / 



 +(49)-08223-4002-58

GB | 21 

ADDITIONAL SAFETY INSTRUCTIONS

Safety instructions for working with compressed 

air and blasting guns

•  The compressor pump and lines can become very 

hot during operation. Touching these parts will burn 

you.

•  The air which is sucked in by the compressor must 

be kept free of impurities that could cause fires or 

explosions in the compressor pump.

•  When releasing the hose coupling, hold the hose 

coupling piece with your hand. This way, you can 

protect yourself against injury from the rebound-

ing hose.

•  Wear safety goggles when working with the blow-

out pistol. Foreign bodies or blown off parts can 

easily cause injuries.

•  Do not blow at people with the blow-out pistol and 

do not clean clothes while being worn. Risk of in-

jury!

Safety information for paint spraying

• 

Do not process any paints or solvents with a flash 

point below 55° C. There is a risk of explosion!

•  Do not heat up paints or solvents. There is a risk 

of explosion!

•  If hazardous liquids are processed, wear protec-

tive filter units (face guards). Also, adhere to the 

safety information provided by the manufacturers 

of such liquids.

•  The details and designations of the Ordinance on 

Hazardous Substances, which are displayed on the 

outer packaging of the processed material, must 

be observed.

•  Additional protective measures are to be under-

taken if necessary, particularly the wearing of suit-

able clothing and masks.

•  Do not smoke during the spraying process and/or 

in the work area. There is a risk of explosion! Paint 

vapors are easily combustible.

•  Never set up or operate the equipment in the vicin-

ity of a fire place, open lights or sparking machines.

•  Do not store or eat food and drink in the work area. 

Paint vapors are harmful to your health.

•  The work area must exceed 30 m

3

 and sufficient 

ventilation must be ensured during spraying and 

drying. Do not spray against the wind. Always ad-

here to the regulations of the local police authority 

when spraying combustible or hazardous materi-

als.

•  Do not process media such as white spirit, butyl 

alcohol and methylene chloride with the PVC pres-

sure hose. These media will destroy the pressure 

hose.

 - Damaged protective devices and parts must be 

properly repaired or replaced by a recognised 

workshop, insofar as nothing different is speci

-

fied in the operating manual.

 - Damaged switches must be replaced at a cus-

tomer service workshop.

 - Do not use any faulty or damaged connection 

cables.

 - Do not use any electric tool on which the switch 

cannot be switched on and off.

15. 

Have  your  electric  tool  repaired  by  a  qualified 

electrician

 - This electric tool conforms to the applicable 

safety regulations. Repairs may only be per-

formed by an electrician using original spare 

parts. Otherwise accidents can occur.

16. Important!

 - For your own safety you must only use the ac-

cessories and additional units listed in the oper-

ating instructions or recommended or specified 

by the manufacturer. The use of mounted tools 

or accessories other than those recommended 

in the operating instructions or catalog may 

place your personal safety at risk.

17. Noise

 -

Wear ear muffs when you use the compressor.

18. Replacing the power cable

 - To prevent hazards, leave the replacement of 

damaged power cables strictly to the manufac-

turer or a qualified electrician. There is a risk of 

electric shock!

19. 

Inflating tires

 -

Directly after inflating tires, check the pressure 

with a suitable pressure gauge, for example at 

your filling station.

20. Roadworthy compressors for building site opera-

tions

 -

Make sure that all lines and fittings are suitable 

for the maximum permissible operating pressure 

of the compressor.

21. Place of installation

 - Set up the compressor on an even surface.

m 

WARNING!

 This electric tool generates an elec-

tromagnetic field during operation. This field can im

-

pair active or passive medical implants under certain 

conditions. In order to prevent the risk of serious or 

deadly injuries, we recommend that persons with 

medical implants consult with their physician and the 

manufacturer of the medical implant prior to operat-

ing the electric tool.