www.scheppach.com /
service@scheppach.com /
+(49)-08223-4002-99 /
+(49)-08223-4002-58
20 |
GB
ADDITIONAL SAFETY INSTRUCTIONS
Safety instructions for working with compressed
air and blasting guns
•
The compressor pump and lines can become very
hot during operation. Touching these parts will burn
you.
•
The air which is sucked in by the compressor must
be kept free of impurities that could cause fires or
explosions in the compressor pump.
•
When releasing the hose coupling, hold the hose
coupling piece with your hand. This way, you can
protect yourself against injury from the rebound
-
ing hose.
•
Wear safety goggles when working with the blow-
out pistol. Foreign bodies or blown off parts can
easily cause injuries.
•
Do not blow at people with the blow-out pistol and
do not clean clothes while being worn. Risk of in
-
jury!
Safety information for paint spraying
•
Do not process any paints or solvents with a flash
point below 55° C. There is a risk of explosion!
•
Do not heat up paints or solvents. There is a risk
of explosion!
•
If hazardous liquids are processed, wear protec
-
tive filter units (face guards). Also, adhere to the
safety information provided by the manufacturers
of such liquids.
• The details and designations of the Ordinance on
Hazardous Substances, which are displayed on the
outer packaging of the processed material, must
be observed.
•
Additional protective measures are to be under
-
taken if necessary, particularly the wearing of suit
-
able clothing and masks.
•
Do not smoke during the spraying process and/or
in the work area. There is a risk of explosion! Paint
vapors are easily combustible.
•
Never set up or operate the equipment in the vicin
-
ity of a fire place, open lights or sparking machines.
•
Do not store or eat food and drink in the work area.
Paint vapors are harmful to your health.
•
The work area must exceed 30 m
3
and sufficient
ventilation must be ensured during spraying and
drying. Do not spray against the wind. Always ad
-
here to the regulations of the local police authority
when spraying combustible or hazardous materi
-
als.
•
Do not process media such as white spirit, butyl
alcohol and methylene chloride with the PVC pres
-
sure hose.
These media will destroy the pressure
hose.
–
Damaged protective devices and parts must be
properly repaired or replaced by a recognised
workshop, insofar as nothing different is speci
-
fied in the operating manual.
–
Damaged switches must be replaced at a cus
-
tomer service workshop.
–
Do not use any faulty or damaged connection
cables.
–
Do not use any electric tool on which the switch
cannot be switched on and off.
15
Have your electric tool repaired by a qualified
electrician
–
This electric tool conforms to the applicable
safety regulations. Repairs may only be per
-
formed by an electrician using original spare
parts. Otherwise accidents can occur.
16
Important!
–
For your own safety you must only use the ac
-
cessories and additional units listed in the oper
-
ating instructions or recommended or specified
by the manufacturer. The use of mounted tools
or accessories other than those recommended
in the operating instructions or catalog may
place your personal safety at risk.
17 Noise
–
Wear ear muffs when you use the compressor.
18
Replacing the power cable
–
To prevent hazards, leave the replacement of
damaged power cables strictly to the manufac
-
turer or a qualified electrician. There is a risk
of electric shock!
19
Inflating tires
–
Directly after inflating tires, check the pressure
with a suitable pressure gauge, for example at
your filling station.
20
Roadworthy compressors for building site opera
-
tions
–
Make sure that all lines and fittings are suitable
for the maximum permissible operating pres
-
sure of the compressor.
21 Place of installation
–
Set up the compressor on an even surface.
Warning!
This electric tool generates an electromag-
netic field during operation. This field can impair ac
-
tive or passive medical implants under certain condi
-
tions. In order to prevent the risk of serious or deadly
injuries, we recommend that persons with medical
implants consult with their physician and the manu
-
facturer of the medical implant prior to operating the
electric tool.
Summary of Contents for 5906135901
Page 2: ...www scheppach com service scheppach com 49 08223 4002 99 49 08223 4002 58 2...
Page 99: ...www scheppach com service scheppach com 49 08223 4002 99 49 08223 4002 58 99...
Page 100: ...www scheppach com service scheppach com 49 08223 4002 99 49 08223 4002 58 100...
Page 102: ...www scheppach com service scheppach com 49 08223 4002 99 49 08223 4002 58 102 DE...
