www.scheppach.com
46 |
GB
19
Inflating tires
–
Directly after inflating tires, check the pres
-
sure with a suitable pressure gauge, for ex
-
ample at your filling station.
20
Roadworthy compressors for building site op
-
erations
–
Make sure that all lines and fittings are suit
-
able for the maximum permissible operating
pressure of the compressor.
21
Place of installation
–
Set up the compressor on an even surface.
22
Supply hoses at pressures above 7 bar should be
equipped with a safety cable (e.g. a wire rope).
23
Avoid over-stressing the piping system by using
flexible hose connections to prevent kinking.
24
Use a residual current circuit breaker with a trigger
current of 30 mA or less. Using a residual current
circuit breaker reduces the risk of an electric shock.
m
WARNING!
This electric tool generates an elec
-
tromagnetic field during operation. This field can im
-
pair active or passive medical implants under certain
conditions. In order to prevent the risk of serious
or deadly injuries, we recommend that persons with
medical implants consult with their physician and the
manufacturer of the medical implant prior to operating
the electric tool.
ADDITIONAL SAFETY INSTRUCTIONS
Safety instructions for working with compressed
air and blasting guns
•
The compressor pump and lines can become
very hot during operation. Touching these parts
will burn you.
•
The air which is sucked in by the compressor must
be kept free of impurities that could cause fires or
explosions in the compressor pump.
•
When releasing the hose coupling, hold the hose
coupling piece with your hand. This way, you can
protect yourself against injury from the rebound
-
ing hose.
•
Wear safety goggles when working with the blow-
out pistol. Foreign bodies or blown off parts can
easily cause injuries.
•
Do not blow at people with the blow-out pistol and
do not clean clothes while being worn. Risk of in
-
jury!
Safety instructions when using spraying attach-
ments (e.g. paint sprayers)
•
Keep the spray attachment away from the com
-
pressor when filling so that no liquid comes into
contact with the compressor.
•
Never spray in the direction of the compressor
when using the spraying attachments (e.g. paint
sprayers). Moisture can lead to electrical hazards!
•
Do not process any paints or solvents with a fl ash
point below 55 °C. Risk of explosion!
•
Do not heat up paints or solvents. Risk of explo
-
sion!
•
If hazardous liquids are processed, wear protective
filter units (face guards). Also, adhere to the safety
information provided by the manufacturers of such
liquids.
•
The details and designations of the Ordinance on
Hazardous Substances, which are displayed on the
outer packaging of the processed material, must be
observed. Additional protective measures are to be
undertaken if necessary, particularly the wearing of
suitable clothing and masks.
•
Do not smoke during the spraying process and/or
in the work area. Risk of explosion! Paint vapours
are easily combustible.
•
Never set up or operate the equipment in the vicin
-
ity of a fire place, open lights or sparking machines.
•
Do not store or eat food and drink in the work area.
Paint vapours are harmful to your health.
•
The work area must exceed 30 m³ and suffi cient
ventilation must be ensured during spraying and
drying.
•
Do not spray against the wind. Always adhere to
the regulations of the local police authority when
spraying combustible or hazardous materials.
•
Do not process media such as white spirit, butyl
alcohol and methylene chloride with the PVC pres
-
sure hose. These media will destroy the pressure
hose.
•
The work area must be separated from the com
-
pressor so that it cannot come into direct contact
with the working medium.
Operating pressure vessels
•
You must keep your pressure vessel in good work
-
ing order, operate the vessel correctly, monitor the
vessel, carry out necessary maintenance and re
-
pair work immediately and meet the relevant safety
precautions.
•
The supervisory authority may enforce essential
control measures in individual cases.
•
A pressure vessel is not allowed to be used if it
has faults or deficiencies that can endanger work
-
ers or third parties.
•
Check the pressure vessel for signs of rust and
damage each time before using. Do not use the
compressor with a damaged or rusty pressure ves
-
sel. If you discover any damage, then please con
-
tact the customer service workshop.
Do not lose these safety instructions
Summary of Contents for 5906145850
