www.scheppach.com /
service@scheppach.com /
+(49)-08223-4002-99 /
+(49)-08223-4002-58
GB
|
7
5
Ensure that the load placed on the sawhorse
does not exceed the applicable safe working
load. Overloading may cause the sawhorse to
fail, possibly resulting in damage to the object
loaded on it and possibly serious injury or death.
6
Never stack sawhorses for additional height.
Caution:
Do not place a weight of more than 600 kg evenly
distributed load* on the sawhorse.
Do not use the sawhorse as a scaffold, standing plat
-
form or stepladder.
*Evenly distributed load:
The maximum evenly
distributed load over the top rail of the sawhorse (for
each sawhorse separately).
This means the maximum weight that can be applied
to this sawhorse (as specified on the type plate and
operating instructions).
Evenly distributed load means when the total weight
is evenly distributed on the top rail. The amount of
weight that can be applied to 2 identical sawhorses
is twice this value.
Store these safety instructions safely.
Observe all safety instructions. If you disregard
the safety instructions, you endanger yourself
and others.
ATTENTION
The device and packaging materials are not
toys! Children must not be allowed to play with
plastic bags, film and small parts! There is a
risk of swallowing and suffocation!
4. Technical data
Dimensions when
folded out in mm
1088 x 465-632 x 618-820
Dimensions when
folded in mm
1088 x 100 x 145
Max. payload in
kg
600
Weight in kg
9,3
5.
Layout
Fit the sawhorse as shown in Figure 1 - 7.
6. Cleaning
Keep the sawhorse as free of dust and dirt as pos
-
sible. Keep the sawhorse clean with a clean cloth or
blow it off with compressed air at low pressure.
We recommend that you clean the sawhorse directly
after every use.
Clean the sawhorse at regular intervals using a
damp cloth and a little soft soap. Do not use any
cleaning products or solvents; they could attack the
plastic parts of sawhorse
7. Storage
m
ATTENTION
!
Store the device and its accessories in a dark, dry
and frost-proof place that is inaccessible to children.
The optimum storage temperature is between 5 and
30˚C.
Store the device in its original packaging.
Cover the device in order to protect it from dust and
moisture.
Store the operating manual with the device.
8.
Disposal and recycling
The equipment is supplied in packaging to prevent it
from being damaged in transit. The raw materials in
this packaging can be reused or recycled.
The equipment and its accessories are made of vari
-
ous types of material, such as metal and plastic. De
-
fective components must be disposed of as special
waste. Ask your dealer or your local council.
