Scheppach 5911255903 Translation Of Original Instruction Manual Download

Page: 23 / 132



www.scheppach.com

GB | 23

1. Introduction

Manufacturer:

scheppach

Fabrikation von Holzbearbeitungsmaschinen GmbH
Günzburger Straße 69
D-89335 Ichenhausen

Dear customer,

We hope your new tool brings you much enjoyment

and success.

Note:

According to the applicable product liability laws, the
manufacturer of the device does not assume liability
for damages to the product or damages caused by

the product that occurs due to:
• Improper handling,
• Non-compliance of the operating instructions,
•

Repairs by third parties, not by authorized service

technicians,

• Installation and replacement of non-original spare

parts,

•

Application other than specified,

We recommend:

Read through the complete text in the operating in-
structions before installing and commissioning the
device.
The operating instructions are intended to help the
user to become familiar with the machine and take ad-
vantage of its application possibilities in accordance
with the recommendations.
The operating instructions contain important informa-

tion on how to operate the machine safely, profession

ally and economically, how to avoid danger, costly re

pairs, reduce downtimes and how to increase reliability

and service life of the machine.

In addition to the safety regulations in the operating
instructions, you have to meet the applicable regula

tions that apply for the operation of the machine in your
country.

Keep the operating instructions package with the
machine at all times and store it in a plastic cover to
protect it from dirt and moisture. Read the instruction
manual each time before operating the machine and

carefully follow its information. The machine can only
be operated by persons who were instructed concern

ing the operation of the machine and who are informed
about the associated dangers. The minimum age re-
quirement must be complied with.

In addition to the safety requirements in these operat

ing instructions and your country’s applicable regula

tions, you should observe the generally recognized

technical rules concerning the operation of identical
constructed machines.

We accept no liability for damage or accidents which

arise due to non-observance of these instructions

and the safety information.

2. Layout (Fig. 1)

1.  Handle
2.  -
3.  Engine brake lever
4.  Upper push bar, / 4a Lower push bar
5.  Plastic star grip nut
6.  Petrol tank
7.

Air filter

8. Primer button
9. Wheel
10. Spark plug
11. Exhaust
12. Dip stick
13. Drive wheel
14.

Wheel height adjustment

15.

Discharge flap

16. Grass box
17. Pull starter
18. Cable clips

3. Scope of delivery (Fig. 1)

(1 - 18 / a - g)

a 2 x round head screw
b 2 x washer
c 1 x manual
e 1 x bracket
f 4 x round head screw
g 4 x Hex nut

•

Open the packaging and remove the device carefully.

• Remove the packaging material as well as the

packaging and transport bracing (if available)

•

Check that the delivery is complete.

• Check the device and its spare parts for possible

damage caused by transportation. In the event of
complaints, you must contact the distributor without
delay. Claims at a later stage will not be accepted.

•

If possible, store the packaging until the warranty

period has expired

•

Before handling the device, make yourself familiar
with it by reading the operating instructions.

• For accessories, consumables and spare parts,

only use original parts. Spare parts are available
from your stockist.

• Include our item number, the device model and

year of manufacture in your order.

Attention!

The device and packaging materials are not toys!

Children must not be allowed to play with plastic