22 | GB
www.scheppach.com /
service@scheppach.com /
+(49)-08223-4002-99 /
+(49)-08223-4002-58
m
ATTENTION!
The device and packaging materials
are not toys! Children must not be al-
lowed to play with plastic bags, film
and small parts! There is a risk of swal-
lowing and suffocation!
4.
Intended use
The compressor is designed to generate
compressed air for compressed-air driven
tools which can be driven with an air vol-
ume of up to approx. 180 l/min (e.g. tire infl
ator, blow-out pistol and paint spray gun).
Due to the limited air output it is not pos-
sible to use the compressor to drive tools
with very high air consumption (for exam-
ple orbital sanders, rod grinders and ham-
mer screwdrivers).
The equipment is to be used only for its
prescribed purpose. Any other use is
deemed to be a case of misuse. The user
/ operator and not the manufacturer will
be liable for any damage or injuries of any
kind caused as a result of this.
Please note that our equipment has not
been designed for use in commercial, trade
or industrial applications. Our warranty will
be voided if the equipment is used in com-
mercial, trade or industrial businesses or
for equivalent purposes.
5. Safety information
m
Attention!
The following basic safe-
ty actions must be taken when using this
compressor in order to protect the user
2.
Device description
1. Transport handle
2. ON/OFF switch
3. Compressor housing
4. Quick-lock coupling
5. Pressure hose
6. Power cord
7. air bleed valve
8. hose with valve adapter
A. Universal adapter, for valves with diam-
eter ca. 6 mm
B. Universal adapter, for valves with diam-
eter ca. 9 mm
C. Adapter for H, J, K
D. Blow-out adapter
E. Valve adapter, e.g. For bicycle valves
F. Ball needle
G. Tyre pressure gauge
H.
Deflating adapter
I. Screw-on valve adapter
J. Universal adapter
3.
Unpacking
• Open the packaging and remove the de-
vice carefully.
• Remove the packaging material as well
as the packaging and transport bracing
(if available).
• Check that the delivery is complete.
• Check the device and accessory parts
for transport damage.
• If possible, store the packaging until the
warranty period has expired.
