23
GB
1. Introduction
MANUFACTURER:
scheppach
Fabrikation von Holzbearbeitungsmaschinen GmbH
Günzburger Straße 69
D-89335 Ichenhausen
DEAR CUSTOMER,
We hope your new tool brings you much enjoyment and
success.
NOTE:
According to the applicable product liability laws, the
manufacturer of the device does not assume liability
for damages to the product or damages caused by the
product that occurs due to:
• Improper handling,
• Non-compliance of the operating instructions,
• Repairs by third parties, not by authorized service
technicians,
• Installation and replacement of non-original spare
parts,
•
Application other than specified,
• A breakdown of the electrical system that occurs due
to the non-compliance of the electric regulations and
VDE regulations 0100, DIN 57113 / VDE0113.
WE RECOMMEND:
Read through the complete text in the operating instruc-
tions before installing and commissioning the device.
The operating instructions are intended to help the user
to become familiar with the machine and take advan-
tage of its application possibilities in accordance with the
recommendations. The operating instructions contain
important information on how to operate the machine
safely, professionally and economically, how to avoid
danger, costly repairs, reduce downtimes and how to in-
crease reliability and service life of the machine.
In addition to the safety regulations in the operating in-
structions, you have to meet the applicable regulations
that apply for the operation of the machine in your coun-
try. Keep the operating instructions package with the ma-
chine at all times and store it in a plastic cover to protect
it from dirt and moisture. Read the instruction manual
each time before operating the machine and carefully
follow its information. The machine can only be operated
by persons who were instructed concerning the opera-
tion of the machine and who are informed about the as-
sociated dangers. The minimum age requirement must
be complied with.
2. Layout (Fig. 1 - 3)
Lieferumfang
1.
Line spool with cutting line
2.
Safe guard
3.
Long handle with drive shaft
4.
Cutting blade
5.
Steady grip
6.
Switch On/Off
7.
Throttle lock
8.
Throttle lever
9.
Throttle lever “lock”
10.
Choke lever
11.
Starter cable
12.
Spark plug boot
13.
Air filter housing cover
14.
Petrol tank
15.
Housing for engine cooler
16.
Fuel pump
17.
Belt
18.
Combined oil/petrol cylinder
19.
Spark plug wrench
20.
Allen key (size 4)
21.
Allen key (size 6)
22.
2 x cable ties
23.
Shield
24.
Outer flange
25.
Saw blade
26.
Saw blade guard
3. Scope of delivery
•
Open the packaging and take out the equipment
with care.
•
Remove the packaging material and any packaging
and/or transportation braces (if available).
•
Check to see if all items are present.
•
Inspect the equipment and accessories for transport
damage.
In case of complaints the supplier is to be
informed immediately. Complaints received at a later
date will not be acknow ledged.
•
If possible, keep the packaging until the end of the
guarantee period.
• Read the operating instructions to make yourself famil-
iar with the device prior to using it.
• After that, please dispose of it in an environmentally
friendly way.
• Only use original parts for accessories as well as for
wearing and spare parts. Spare parts are available from
your specialized dealer.
• Specify our part numbers as well as the type and year of
construction of the device in your orders.
m
Important!
The equipment and packaging material are not toys.
Do not let children play with plastic bags, foils or small
parts. There is a danger of swallowing or suff ocating!
Summary of Contents for BC52PB
