Scheppach HC51V, Translation From The Original Instruction Manual

16

GB

Operating pressure vessels

• 

You must keep your pressure vessel in good work-

ing order, operate the vessel correctly, monitor the 

vessel, carry out necessary maintenance and re-

pair work immediately and meet the relevant safety 

precautions.

• 

The supervisory authority may enforce essential 

control measures in individual cases.

• 

A pressure vessel is not allowed to be used if it has 

faults or deficiencies that can endanger workers 

or third parties.

• 

Check the pressure vessel for signs of rust and 

damage each time before using. Do not use the 

compressor with a damaged or rusty pressure 

vessel. If you discover any damage, then please 

contact the customer service workshop.

Do not lose these safety instructions.

WARNING!

 This electric tool generates an electro-

magnetic  field  during  operation.  This  field  can  im

-

pair active or passive medical implants under cer-

tain conditions. In order to prevent the risk of serious 

or deadly injuries, we recommend that persons with 

medical implants consult with their physician and the 

manufacturer of the medical implant prior to operat-

ing the electric tool.

6.  Technical data

Mains connection

230 V ~ / 50 Hz

Motor rating W

1500

Operating mode

S3 25%

Compressor speed

4000 min

-1

Pressure vessel capacity  

(in liters)

50

Operating pressure

approx. 10 bar

Theoretical intake capacity  

(l/min)

approx. 220

Sound power level L

WA

97 dB(A)

Uncertainty K

WA

2.92 dB

Protection type

IP20

Weight of the unit in kg

22.5

Max. altitude  

(above mean sea level)

1000 m

The noise emission values were measured in ac-

cordance with EN ISO 3744.

Wear hearing protection.

The effects of noise can cause a loss of hearing.

20 

Roadworthy compressors for building site opera-

tions

–

Make sure that all lines and fittings are suitable 

for the maximum permissible operating pressure 

of the compressor.

21 

Place of installation

–

Set up the compressor on an even surface.

ADDITIONAL SAFETY INSTRUCTIONS

Safety instructions for working with compressed 

air and blasting guns

•  The compressor pump and lines can become very 

hot during operation. Touching these parts will burn 

you.

•  The air which is sucked in by the compressor must 

be kept free of impurities that could cause fires or 

explosions in the compressor pump.

•  When releasing the hose coupling, hold the hose 

coupling piece with your hand. This way, you can 

protect yourself against injury from the rebound-

ing hose.

•  Wear safety goggles when working with the blow-

out pistol. Foreign bodies or blown off parts can 

easily cause injuries.

•  Do not blow at people with the blow-out pistol and 

do not clean clothes while being worn. Risk of in-

jury!

Safety information for paint spraying

• 

Do not process any paints or solvents with a flash 

point below 55° C. There is a risk of explosion!

•  Do not heat up paints or solvents. There is a risk 

of explosion!

•  If hazardous liquids are processed, wear protec-

tive filter units (face guards). Also, adhere to the 

safety information provided by the manufacturers 

of such liquids.

•  The details and designations of the Ordinance on 

Hazardous Substances, which are displayed on the 

outer packaging of the processed material, must 

be observed.

•  Additional protective measures are to be under-

taken if necessary, particularly the wearing of suit-

able clothing and masks.

•  Do not smoke during the spraying process and/or 

in the work area. There is a risk of explosion! Paint 

vapors are easily combustible.

•  Never set up or operate the equipment in the vicin-

ity of a fire place, open lights or sparking machines.

•  Do not store or eat food and drink in the work area. 

Paint vapors are harmful to your health.

•  The work area must exceed 30 m

3

 and sufficient 

ventilation must be ensured during spraying and dry-

ing. Do not spray against the wind. Always adhere 

to the regulations of the local police authority when 

spraying combustible or hazardous materials.

•  Do not process media such as white spirit, butyl 

alcohol and methylene chloride with the PVC pres-

sure hose. These media will destroy the pressure 

hose.