www.scheppach.com
service@scheppach.com
+(49)-08223-4002-99
+(49)-08223-4002-58
19 І 112
www.scheppach.com
service@scheppach.com
+(49)-08223-4002-99
+(49)-08223-4002-58
Troubleshooting
Fault
Possible cause
Remedy
The compressor does
not start.
•
No supply voltage.
•
Insuffi cient supply voltage.
•
Outside temperature is too low.
•
Motor is overheated.
•
No supply voltage.
•
Insufficient supply voltage.
•
Outside temperature is too low.
•
Motor is overheated.
The compressor starts
but there is no pressure.
•
The non-return valve leaks.
•
The seals are damaged.
•
The drain plug for condensation water (15)
leaks.
•
The non-return valve leaks.
•
The seals are damaged.
•
The drain plug for condensation water (9) leaks.
The compressor starts,
pressure is shown on
the pressure gauge, but
the tools do not start.
•
The hose connections have a leak.
•
A quick-lock coupling has a leak.
•
Insuffi cient pressure set on the pressure
regulator (3).
•
The hose connections have a leak.
•
A quick-lock coupling has a leak.
•
Insuffi cient pressure set on the pressure
regulator (3).
